Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAE231111R0113 — Installation Contactor
contactorPart number: 1SAE231111R0113
ABB 1SAE231111R0113 (ESB25-13N-01) is a four-pole installation contactor with one normally open and three normally closed main contacts. Its control circuit is rated 24 V AC/DC, and its AC-1 operating current is 25 A. It occupies two modular spacings and has IP20 protection. Confirm the control supply, switching duty and enclosure space before selection.
Looking for ABB 1SAE231111R0113? This catalogue reference is listed under contactor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAE231111R0113 |
| Category | Electrical & controls |
| Product Net Width | 36 mm |
| Product Net Depth / Length | 65 mm |
| Product Net Height | 85 mm |
| Product Net Weight | 0.245 kg |
| Number of Main Contacts NO | 1 |
| Number of Main Contacts NC | 3 |
| Number of Auxiliary Contacts NO | 0 |
| Number of Auxiliary Contacts NC | 0 |
| Number of Poles | 4 |
| Rated Operational Voltage | Main Circuit 220 V DC |
| Rated Frequency (f) | Control Circuit 400 Hz |
| Rated Operational Current AC-1 (I e ) | 25 A |
| Rated Operational Current AC-3 (I e ) | (230 V) Single Phase, NC 6 A |
| Rated Operational Current AC-7a (I e ) | (NC) 25 A |
| Rated Operational Current AC-7b (I e ) | (230 V) Single Phase, NC 6 A |
| Rated Operational Power AC-1 (P e ) | (230 V) Single Phase, NC 5.8 kW |
| Rated Operational Power AC-3 (P e ) | (230 V) Single Phase, NC 0.9 kW |
| Rated Operational Power AC-7a (P e ) | (230 V) Single Phase, NC 5.8 kW |
| Rated Operational Power AC-7b (P e ) | (230 V) Single Phase, NC 0.9 kW |
| Rated Breaking Capacity AC-3 | 8 x Ie / AC-3 |
| Rated Making Capacity AC-3 | 10 x Ie / AC-3 |
| Rated Short-time Withstand Current Low Voltage (I cw ) | at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 72 A |
| Rated Insulation Voltage (U i ) | 500 V |
| Rated Impulse Withstand Voltage (U imp ) | 6 kV |
| Maximum Electrical Switching Frequency | (AC-1) 300 cycles per hour |
| Coil Operating Limits | (acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) |
| Rated Control Circuit Voltage (U c ) | 24 V AC/DC |
| Power Loss | at Rated Operating Conditions AC-1 per Pole 2 W |
| Published component type | Installation Contactor |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Width in modular spacings | 2 |
| Degree of protection | IP20 |
| Built-in depth | 58 mm |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What control voltage does ABB 1SAE231111R0113 require?
The ESB25-13N-01 has a 24 V AC/DC control voltage. Check the available control supply separately from the voltage and duty of the switched load.
How are the ESB25-13N-01 main contacts arranged?
It has one normally open and three normally closed main contacts. Match this arrangement to the circuit required, especially when replacing a contactor with a different combination.
Is the 25 A rating suitable for every load on the ESB25-13N-01?
No. The stated 25 A rating is associated with AC-1 duty; suitability depends on the load type, voltage and applicable utilisation category. Check the relevant ratings before selection.
How much panel space does the ESB25-13N-01 need?
The contactor occupies two modular spacings. Its listed built-in depth is 58 mm; check the enclosure and clearances before installation.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.