Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAE232111R0631 — Installation Contactor
contactorPart number: 1SAE232111R0631
ABB EN25-31N-06 (1SAE232111R0631) is a four-pole installation contactor with three normally open and one normally closed main contact. Its control circuit is rated at 230–240 V AC/DC, and it offers manual on, off and automatic operation. The 36 mm-wide unit mounts on a DIN rail; verify the load duty and circuit requirements before selection.
Looking for ABB 1SAE232111R0631? This catalogue reference is listed under contactor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAE232111R0631 |
| Category | Electrical & controls |
| Product Net Width | 36 mm |
| Product Net Depth / Length | 65 mm |
| Product Net Height | 85 mm |
| Product Net Weight | 0.24 kg |
| Number of Main Contacts NO | 3 |
| Number of Main Contacts NC | 1 |
| Number of Auxiliary Contacts NO | 0 |
| Number of Auxiliary Contacts NC | 0 |
| Number of Poles | 4P |
| Rated Operational Voltage | Main Circuit 220 V DC |
| Rated Frequency (f) | Control Circuit 400 Hz |
| Rated Operational Current AC-1 (I e ) | (NC) 25 A |
| Rated Operational Current AC-3 (I e ) | (230 V) Single Phase, NC 6 A |
| Rated Operational Current AC-7a (I e ) | (NC) 25 A |
| Rated Operational Current AC-7b (I e ) | (230 V) Single Phase, NC 6 A |
| Rated Operational Power AC-1 (P e ) | (230 V) Single Phase, NC 5.8 kW |
| Rated Operational Power AC-3 (P e ) | (230 V) Single Phase, NC 1.3 kW |
| Rated Operational Power AC-7a (P e ) | (230 V) Single Phase, NC 5.8 kW |
| Rated Operational Power AC-7b (P e ) | (230 V) Single Phase, NC 0.9 kW |
| Rated Breaking Capacity AC-3 | 8 x Ie / AC-3 |
| Rated Making Capacity AC-3 | 10 x Ie / AC-3 |
| Rated Short-time Withstand Current Low Voltage (I cw ) | at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 72 A |
| Rated Insulation Voltage (U i ) | 500 V |
| Rated Impulse Withstand Voltage (U imp ) | 4 kV |
| Maximum Electrical Switching Frequency | (AC-1) 300 cycles per hour |
| Coil Operating Limits | (acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) |
| Rated Control Circuit Voltage (U c ) | 230–240 V AC/DC |
| Power Loss | at Rated Operating Conditions AC-1 per Pole 2 W |
| Published component type | Installation Contactor |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Mounting type | DIN rail |
| Manual operation | On, Off, Auto |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What control voltage and contact configuration does ABB 1SAE232111R0631 have?
The EN25-31N-06 has a 230–240 V AC/DC control circuit and four main contacts: three normally open and one normally closed. Check these against the existing circuit before ordering.
Can the EN25-31N-06 contactor be operated manually?
Yes. Its selector offers manual off, automatic and manual on modes. The manual-on position returns to automatic when the coil is next energised.
Is this 25 A contactor suitable for every 25 A motor load?
Not necessarily. The EN25 range controls single- and three-phase loads up to 25 A, but the applicable rating depends on the load and operating conditions. Confirm the motor duty, voltage and contact ratings before selecting it.
What space and mounting does the EN25-31N-06 require?
The contactor measures 36 mm wide, 85 mm high and 65 mm deep, and is intended for DIN-rail mounting. Allow for wiring and check the enclosure requirements for the installation.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.