Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAE351111R0640 — Installation Contactor
contactorPart number: 1SAE351111R0640
ABB ESB63-40N-06 installation contactor, part number 1SAE351111R0640, with four normally open main contacts and a 230 V AC/DC control coil. The 63 A contactor mounts on DIN rail and is intended for switching loads such as lighting, heating and motors. Select the rating for the actual load and operating conditions.
Looking for ABB 1SAE351111R0640? This catalogue reference is listed under contactor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAE351111R0640 |
| Category | Electrical & controls |
| Item Type Name | Installation Contactor |
| Product Family / Series | ESB63 Series |
| Model Number | ESB63-40N-06 |
| number_of_poles | 4-pole, 4 normally open main contacts |
| rated_current_AC1 | 63 A |
| rated_current_AC3 | 30 A |
| control_voltage_AC | 230 V AC |
| control_voltage_DC | 230 V DC |
| contact_voltage_rating_AC | 400 V AC |
| contact_voltage_rating_DC | 220 V DC |
| switching_power_AC | 43.6 kW |
| switching_power_DC | 14.5 kW |
| rated_impulse_voltage | 6 kV |
| protection_rating | IP20 |
| mounting_type | DIN rail |
| module_width | 54 mm (3 modules) |
| frequency | 400 Hz |
| Dimensions | 85 mm high × 54 mm wide × approximately 65 mm deep |
| Published component type | Installation Contactor |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Operating ambient temperature | −25 to +55 °C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What coil voltage and contact arrangement does ABB 1SAE351111R0640 have?
The ESB63-40N-06 has a 230 V AC/DC control coil and four normally open main contacts, with no normally closed main contacts. Check both the coil supply and contact arrangement when selecting a replacement.
Can the ESB63-40N-06 switch a motor or other three-phase load?
It can be used for loads including motors, heating and lighting, but 63 A should not be assumed to be the permissible motor current in every installation. Verify the utilization category, voltage and motor duty against the applicable ratings before selection.
How much panel space does this contactor need?
The contactor mounts on DIN rail and is 54 mm wide. Published dimensions are approximately 85 mm high and 65 mm deep. Check the available enclosure space and installation clearances before ordering.
Will the ESB63-40N-06 work with a triac-controlled EV charger?
Do not assume compatibility. In one forum discussion, a user reported that this exact contactor switched on but did not switch off when driven by a particular EV charger’s optotriac. This is an individual observation, not a general specification. Check the controller manufacturer's contactor requirements and have the complete control circuit assessed by a qualified electrician.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.