Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAE661111R0140 — Installation Contactors
contactorPart number: 1SAE661111R0140
ABB 1SAE661111R0140 (ESB100-40N-01) is a four-pole installation contactor with four normally open main contacts and a 24 V AC/DC control coil. It is rated 100 A for AC-1 and AC-7a use and is designed for switching single-phase and three-phase loads.
Looking for ABB 1SAE661111R0140? This catalogue reference is listed under contactor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAE661111R0140 |
| Category | Electrical & controls |
| Product Net Width | 108 mm |
| Product Net Depth / Length | 65 mm |
| Product Net Height | 85 mm |
| Product Net Weight | 0.81 kg |
| Number of Main Contacts NO | 4 |
| Number of Main Contacts NC | 0 |
| Number of Auxiliary Contacts NO | 0 |
| Number of Auxiliary Contacts NC | 0 |
| Number of Poles | 4P |
| Rated Operational Voltage | Main circuit: 400 V AC; 220 V DC |
| Rated Frequency (f) | Control circuit: DC, 50, 60 or 400 Hz; main circuit: DC, 50 or 60 Hz |
| Rated Operational Current AC-1 (I e ) | (NO) 100 A |
| Rated Operational Current AC-7a (I e ) | (NO) 100 A |
| Rated Operational Power AC-1 (P e ) | 23 kW at 230 V single-phase; 69.3 kW at 400 V three-phase |
| Rated Operational Power AC-7a (P e ) | (230 V) Single Phase, NO 23 kW |
| Rated Insulation Voltage (U i ) | 500 V |
| Rated Impulse Withstand Voltage (U imp ) | 6 kV |
| Maximum Electrical Switching Frequency | (AC-1) 150 cycles per hour |
| Coil Operating Limits | (acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) |
| Rated Control Circuit Voltage (U c ) | 24 V AC/DC |
| Power Loss | at Rated Operating Conditions per Pole 4.2 W |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 |
| Connecting Capacity Main Circuit | Flexible with Ferrule 1x 10 ... 35 mm² |
| Connecting Capacity Control Circuit | Flexible with Ferrule 1x 1 ... 2.5 mm² |
| Wire Stripping Length | Control Circuit 7 mm |
| Degree of Protection | IP20 |
| Tightening Torque | Control Circuit 0.9 N·m |
| Terminal Type | Screw Terminals |
| Published component type | Installation Contactors |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Ambient Air Temperature | Operation: -25 to +55 °C; storage: -40 to +80 °C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What control voltage does ABB 1SAE661111R0140 require?
The ESB100-40N-01 has a 24 V AC/DC control coil. Do not confuse the coil voltage with the voltage switched by the main contacts; verify the control supply before ordering.
How many contacts does the ESB100-40N-01 have?
It is a four-pole installation contactor with four normally open main contacts. Verify the contact arrangement and control voltage against the existing device before selecting a replacement.
Is the 100 A rating suitable for every type of load?
No. The 100 A rating applies to normally open contacts in the AC-1 and AC-7a utilization categories at an ambient temperature up to 55 °C. ABB does not list an AC-3 motor rating for ESB100..N in its catalog. Check the load category and application before selection.
What are the dimensions of the ABB ESB100-40N-01 contactor?
The listed net dimensions are 108 mm wide, 85 mm high and 65 mm deep, with a net weight of 0.81 kg. Check available panel space and installation requirements before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.