Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAE661111R0640 — Installation Contactors
contactorPart number: 1SAE661111R0640
ABB ESB100-40N-06 (1SAE661111R0640) is a four-pole installation contactor with four normally open main contacts and a 230 V AC/DC control coil. Its main contacts are rated 100 A under AC-1 and AC-7a conditions. It is intended for switching suitable single-phase and three-phase loads and mounts on a DIN rail. Confirm the control supply and load ratings for the intended application.
Looking for ABB 1SAE661111R0640? This catalogue reference is listed under contactor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAE661111R0640 |
| Category | Electrical & controls |
| Product Net Width | 108 mm |
| Product Net Depth / Length | 65 mm |
| Product Net Height | 85 mm |
| Product Net Weight | 0.81 kg |
| Number of Main Contacts NO | 4 |
| Number of Main Contacts NC | 0 |
| Number of Auxiliary Contacts NO | 0 |
| Number of Auxiliary Contacts NC | 0 |
| Number of Poles | 4P |
| Rated Operational Voltage | Main circuit: 400 V AC; 220 V DC |
| Rated Frequency (f) | Control circuit: DC, 50 Hz, 60 Hz and 400 Hz; main circuit: DC, 50 Hz and 60 Hz |
| Rated Operational Current AC-1 (I e ) | Normally open contacts: 100 A |
| Rated Operational Current AC-7a (I e ) | Normally open contacts: 100 A |
| Rated Operational Power AC-1 (P e ) | (230 V) Single Phase, NO 23 kW |
| Rated Operational Power AC-7a (P e ) | (230 V) Single Phase, NO 23 kW |
| Rated Insulation Voltage (U i ) | 500 V |
| Rated Impulse Withstand Voltage (U imp ) | 6 kV |
| Maximum Electrical Switching Frequency | (AC-1) 150 cycles per hour |
| Coil Operating Limits | (acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) |
| Rated Control Circuit Voltage (U c ) | 230 V AC/DC |
| Power Loss | at Rated Operating Conditions per Pole 4.2 W |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 |
| Connecting Capacity Main Circuit | Flexible with Ferrule 1x 10 ... 35 mm² |
| Connecting Capacity Control Circuit | Flexible with Ferrule 1x 1 ... 2.5 mm² |
| Wire Stripping Length | Control Circuit 7 mm |
| Degree of Protection | IP20 |
| Tightening Torque | Control Circuit 0.9 N·m |
| Terminal Type | Screw terminals |
| Published component type | Installation Contactors |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Ambient Air Temperature | Operation: -25 to +55 °C; storage: -40 to +80 °C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What coil voltage and contact configuration does ABB 1SAE661111R0640 have?
The ESB100-40N-06 has a 230 V AC/DC control coil and four normally open main contacts, with no normally closed main contacts. Verify the existing control voltage and contact arrangement before selecting a replacement.
What current and main-circuit voltage is the ESB100-40N-06 rated for?
Its normally open contacts are rated 100 A in AC-1 and AC-7a. The listed main-circuit operational voltages are 400 V AC and 220 V DC. The 100 A rating is not a blanket motor or every-load rating; check the utilization category and load conditions.
Can this contactor control single-phase or three-phase loads?
It is intended to control single-phase or three-phase loads within its applicable ratings. Check the load type, operating voltage, current and utilization category before selection; a 100 A AC-1 rating alone does not establish motor suitability.
How much panel space does the ESB100-40N-06 require?
The listed overall dimensions are 108 mm wide, 85 mm high and 65 mm deep, with a width of six modular spacings. It is designed for DIN-rail mounting and uses screw terminals. Check the available enclosure space before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.