Technical illustration. Representative component image; exact configuration and appearance may vary. Images are for reference only. The supplied part’s appearance may differ.
1SAP172200R0001 — PLC communication module
PLCPart number: 1SAP172200R0001
ABB 1SAP172200R0001 is the CM582-DP communication module for the AC500 PLC range. It provides a PROFIBUS DP slave interface with one RS-485 serial interface and a 9-pin female D-sub connector, at a data rate up to 12 Mbit/s. Verify the controller and firmware before ordering.
Looking for ABB 1SAP172200R0001? This catalogue reference is listed under PLC. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAP172200R0001 |
| Category | Electrical & controls |
| Product Net Weight | 0.094 kg |
| Product Net Depth / Length | 62 mm |
| Product Net Height | 135 mm |
| Product Net Width | 28 mm |
| Gross Weight | 0.124 kg |
| Communication Interface | Serial, RS-485 |
| Number of Hardware Interfaces | 1 RS-485; 0 industrial Ethernet |
| Degree of Protection | IP20 |
| Product Name | Distributed Automation PLCs |
| Published component type | PLC communication module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Protocol and role | PROFIBUS DP slave |
| PROFIBUS connector | 9-pin female D-sub |
| Maximum data transmission rate | 12 Mbit/s |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Is ABB 1SAP172200R0001 a PROFIBUS master or slave?
The CM582-DP is a PROFIBUS DP slave communication module, not a PROFIBUS master. It is an AC500 communication module.
Sources
Which connector and interface does the CM582-DP use?
It has one RS-485 serial interface and a female 9-pin D-sub PROFIBUS connector. ABB specifies a communication rate of up to 12 Mbit/s.
Sources
Will this module work with my AC500 PLC and software?
ABB specifies Automation Builder V2.0.2 or later and CPU firmware V2.6 or later for the CM582-DP. Confirm the exact CPU model, firmware, terminal base and equipment serial number before ordering; those minimum versions alone do not establish fitment.
Sources
Where can I check CM582-DP communication faults?
ABB says CM582-DP diagnostic messages appear in the Diagnosis tab of the module node in Automation Builder, not on the PLC display. For a communication error, check the bus connection and configuration.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.