Technical illustration. Published product/series reference; confirm the exact configuration and supplied appearance. Images are for reference only. The supplied part’s appearance may differ.
1SAP187100R0001 — PLC analogue I/O-module
I/O modulePart number: 1SAP187100R0001
ABB 1SAP187100R0001 (TA5120-2AI-UI) is an AC500-eCo analog input option board with two 12-bit voltage or current inputs. Supported ranges include 0–10 V, 0–20 mA and 4–20 mA. A removable six-pin spring terminal block is included. Confirm the intended processor and firmware versions before ordering.
Looking for ABB 1SAP187100R0001? This catalogue reference is listed under I/O module. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAP187100R0001 |
| Category | Sensors & automation |
| Product Net Weight | 0.015 kg |
| Product Net Depth / Length | 54.2 mm |
| Product Net Height | 42 mm |
| Product Net Width | 28.5 mm |
| Gross Weight | 0.034 kg |
| Number of Analog Configurable I/Os | 0 |
| Analog Inputs | 2 |
| Input Signal | Voltage or current: 0–10 V, 0–20 mA, 4–20 mA |
| Resolution | Analog input: 12 bit |
| Degree of Protection | Housing IP20 |
| Product Name | Distributed Automation PLCs |
| Published component type | PLC analogue I/O-module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Terminal block | Removable 6-pin spring terminal block included |
| Process voltage | 24 V DC |
| Input channel grouping | 2 analog inputs in 1 group |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What signals can the ABB 1SAP187100R0001 accept?
The TA5120-2AI-UI has two analog inputs with 12-bit resolution. Its selectable signal ranges are 0–10 V, 0–20 mA and 4–20 mA.
Will this option board work with my AC500-eCo PLC?
ABB identifies the TA5120-2AI-UI as an analog input extension for AC500-eCo PM50xx processors. Confirm the exact CPU model, serial number, hardware and firmware versions before ordering; compatibility with a particular installation is not established here.
Sources
What software and firmware versions are needed for the TA5120-2AI-UI?
ABB specifies Automation Builder 2.5.2, SystemFW 3.5.0_HF-7 and BootFW 3.5.1 or higher. Earlier versions can cause a configuration error and prevent the CPU from starting. Verify the versions on the intended processor.
Sources
Does the TA5120-2AI-UI include its terminal block?
Yes. ABB states that the removable six-pin terminal block is included. The product listing identifies the connection as spring terminals.
Sources
Are the two analog input channels isolated from each other?
No. ABB states that the negative analog input terminals are connected internally and that the analog inputs cannot be connected in series. Consult ABB’s connection documentation when designing the sensor circuit.
Sources
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.