Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
1SAP250300R0001 — PLC analogue I/O-module
I/O modulePart number: 1SAP250300R0001
ABB AI523 (1SAP250300R0001) is an S500 analog input module with 16 configurable inputs for voltage, current and resistance temperature detectors. Inputs can also be used as digital inputs. The module uses a 24 V DC process supply and a TU515 or TU516 terminal unit.
Looking for ABB 1SAP250300R0001? This catalogue reference is listed under I/O module. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | ABB |
|---|---|
| Part number | 1SAP250300R0001 |
| Category | Sensors & automation |
| Product Net Weight | 0.125 kg |
| Product Net Depth / Length | 62 mm |
| Product Net Height | 76 mm |
| Product Net Width | 67.5 mm |
| Gross Weight | 0.149 kg |
| Number of Analog Configurable I/Os | 0 |
| Analog Inputs | 16 |
| Input Signal | Voltage, current, RTD, digital input |
| Resolution | Analog Input 13 bit |
| Degree of Protection | Housing IP20 |
| Supply Voltage | 24 V DC process supply |
| Ambient Air Temperature | Operation 0 ... +60 °C |
| Product Name | Distributed Automation I/Os |
| Published component type | PLC analogue I/O-module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Voltage input ranges | 0 to 10 V; -10 to +10 V |
| Current input ranges | 0 to 20 mA; 4 to 20 mA |
| RTD types | Pt100, Pt1000, Ni1000 |
| Terminal unit | TU515 or TU516 |
| Input isolation | Channels isolated from I/O bus; not isolated from each other or process supply |
| Conversion cycle | 2 ms for 16 inputs; 1 s with Pt/Ni inputs |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What signals can the ABB AI523 1SAP250300R0001 accept?
The AI523 has 16 inputs configurable for voltage, current or Pt100, Pt1000 and Ni1000 resistance temperature detectors. Inputs can also be used as digital inputs. Each input can be configured individually, subject to the requirements of the selected wiring mode.
Can the AI523 measure 4–20 mA and 0–10 V signals on the same module?
Yes. ABB lists 0–10 V, -10 to +10 V, 0–20 mA and 4–20 mA ranges and says that each input can be configured individually. Check the selected channel configuration and wiring against the ABB manual.
How many AI523 inputs does a three-wire RTD use?
A three-wire Pt100, Pt1000 or Ni1000 measurement uses two adjacent analog channels, starting with an even-numbered channel. The calculated reading is stored at the higher-numbered channel.
Which terminal unit is needed for the AI523, and are its channels isolated from each other?
ABB specifies a TU515 or TU516 I/O terminal unit. The channels are isolated from the I/O bus, but not from each other or from the process supply. Confirm the terminal unit and existing system configuration before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.