Images are for reference only. The supplied part’s appearance may differ.
Emerson Asco E262K208S1N01H1 - 2/2 NC Solenoid Valve
solenoid valvePart number: E262K208S1N01H1
ASCO E262K208S1N01H1 is a Series 262 direct-operated, 2/2 normally closed solenoid valve with a 24 V DC coil. It has a G 1/4 port connection, 5.6 mm orifice, brass body, NBR seal and manual operator. Confirm the operating pressure and suitability for the intended fluid and equipment before ordering.
Looking for Asco Numatics E262K208S1N01H1? This catalogue reference is listed under solenoid valve. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Asco Numatics |
|---|---|
| Part number | E262K208S1N01H1 |
| Category | Hydraulics |
| Published designation | Emerson Asco E262K208S1N01H1 - 2/2 NC Solenoid Valve |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Series | 262 |
| Valve function | 2/2 normally closed |
| Operation | Direct operated |
| Coil voltage | 24 V DC |
| Port connection | G 1/4 |
| Orifice diameter | 5.6 mm |
| Body material | Brass |
| Seal material | NBR |
| Manual operator | Maintained |
| Coil power | 11.6 W DC |
| Flow coefficient Kv | 0.63 m³/h |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What voltage does the E262K208S1N01H1 solenoid valve require?
The E262K208S1N01H1 is listed with a 24 V DC coil. Check the existing coil label and the available supply before ordering; do not assume that another voltage version is interchangeable.
What port and orifice sizes does this ASCO valve have?
The valve is listed with a G 1/4 port connection and a 5.6 mm orifice. Confirm the existing thread and connection requirements before selecting a replacement.
Does the E262K208S1N01H1 have manual operation?
Yes. The exact part is listed with a manual operator; one technical listing describes it as maintained. Confirm the required operator and connector configuration against the existing valve.
What pressure rating should I use for the 24 V DC valve?
Published listings conflict: one gives 0–2 bar for this exact 24 V DC part, while another lists a 6.5 bar maximum. Verify the permissible operating pressure and fluid with ASCO before ordering or use; do not assume the higher figure applies.
Will this valve fit my equipment?
Equipment-specific fitment has not been established. Compare the full valve and coil markings, connection, voltage, pressure and fluid requirements, and provide the equipment model and serial number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.