Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Az Pneumatica 00.028.0 - 24V DC Solenoid Coil 9mm ID
connectorPart number: 00.028.0
A published reference 00.028.0 is a 22 mm solenoid coil rated at 24 V DC with 3 W rated power consumption. It has an ED 100% duty cycle and IP65 protection when its connector is correctly mounted. Confirm valve compatibility and bore dimensions before ordering.
Looking for AZ Pneumatica 00.028.0? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | AZ Pneumatica |
|---|---|
| Part number | 00.028.0 |
| Category | Electrical & controls |
| Published designation | Az Pneumatica 00.028.0 - 24V DC Solenoid Coil 9mm ID |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Rated voltage | 24 V DC |
| Rated power consumption | 3 W |
| Coil size designation | 22 mm |
| Voltage tolerance | ±10% |
| Duty cycle | ED 100% |
| Maximum working temperature | +50 °C |
| Ingress protection | IP65 with connector correctly mounted |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What voltage and power does the a published reference 00.028.0 coil require?
The 00.028.0 is rated for 24 V DC and consumes 3 W at rated operation. Its specified voltage tolerance is ±10%; it is not the 24 V AC version.
Is the 00.028.0 coil suitable for continuous operation?
A published reference specifies ED 100% duty cycle and a maximum working temperature of +50 °C for this coil.
Is the 00.028.0 coil protected against dust and water?
The manufacturer specifies IP65 protection only when the connector is correctly mounted. Do not assume that the bare coil has this protection.
Is the 00.028.0 coil a 9 mm bore replacement for my valve?
One listing describes a 9 mm internal diameter, but the manufacturer identifies the coil as 22 mm without specifying its bore on the product page. Confirm the bore and fitment before ordering; provide the valve model and equipment serial number if available.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.