Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
AZ Pneumatica 00.029.0 - 24V AC Solenoid Coil 9mm ID
connectorPart number: 00.029.0
AZ Pneumatica 00.029.0 is a 22 mm solenoid coil rated for 24 V AC, 50/60 Hz. The manufacturer specifies 5 VA holding and 7.5 VA inrush consumption, a 100% duty cycle and IP65 protection with the connector correctly mounted. Verify valve and connector compatibility before ordering.
Looking for AZ Pneumatica 00.029.0? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | AZ Pneumatica |
|---|---|
| Part number | 00.029.0 |
| Category | Electrical & controls |
| Published designation | AZ Pneumatica 00.029.0 - 24V AC Solenoid Coil 9mm ID |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Coil size designation | 22 mm |
| Rated voltage | 24 V AC |
| Frequency | 50/60 Hz |
| Rated holding consumption | 5 VA |
| Inrush consumption | 7.5 VA |
| Duty cycle | ED 100% |
| Maximum working temperature | +50 °C |
| Voltage tolerance | ±10% |
| Ingress protection | IP65 with connector correctly mounted |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What supply voltage and power does the 00.029.0 coil require?
The coil is rated for 24 V AC at 50/60 Hz. A published reference specifies 5 VA holding consumption and 7.5 VA inrush; it is not the 24 V DC coil.
Will this coil fit my pneumatic valve?
A published reference identifies 00.029.0 as a 22 mm coil. A 9 mm internal diameter appears in a product listing, but the manufacturer page does not confirm that dimension. Check the valve model, coil dimensions and connector; provide the equipment serial number, if available, to verify fitment.
Can the 00.029.0 coil be energized continuously?
The manufacturer states a 100% ED duty cycle and a maximum working temperature of +50 °C. Check the complete installation against the applicable operating conditions.
Is the 00.029.0 coil protected against dust and water?
The manufacturer lists IP65 protection when the connector is correctly mounted. The rating should not be assumed for an unconnected or incorrectly assembled coil.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.