Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
AZ Pneumatica 00.030.0 - 110V AC Solenoid Coil 9mm ID
connectorPart number: 00.030.0
A published reference 00.030.0 is a 22 mm solenoid coil rated for 110 V AC at 50/60 Hz. The manufacturer lists 5 VA rated consumption, 7.5 VA inrush and 100% duty cycle. IP65 protection applies with the connector correctly mounted. Verify valve model, dimensions and equipment serial number before ordering.
Looking for AZ Pneumatica 00.030.0? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | AZ Pneumatica |
|---|---|
| Part number | 00.030.0 |
| Category | Electrical & controls |
| Published designation | AZ Pneumatica 00.030.0 - 110V AC Solenoid Coil 9mm ID |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Coil size designation | 22 mm |
| Rated voltage | 110 V AC |
| Frequency | 50/60 Hz |
| Voltage tolerance | ±10% |
| Rated apparent power | 5 VA |
| Inrush apparent power | 7.5 VA |
| Duty cycle | ED 100% |
| Maximum working temperature | +50 °C |
| Ingress protection | IP65 with connector correctly mounted |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What supply voltage and frequency does the 00.030.0 coil require?
A published reference specifies 110 V AC at 50/60 Hz with a voltage tolerance of ±10%. It is not the 24 V version.
What are the rated and inrush power values for this coil?
The manufacturer lists 5 VA rated and 7.5 VA inrush for 00.030.0. A low-consumption option is mentioned separately; do not assume the standard coil is rated at 1.5 W.
Can the 00.030.0 coil remain energized continuously?
The manufacturer specifies a 100% duty cycle and a maximum working temperature of +50 °C. Check the actual operating conditions before use.
What does the IP65 rating for this coil depend on?
The specified IP65 protection applies when the connector is correctly mounted; it should not be assumed for an unconnected coil.
Will the 00.030.0 coil fit my existing valve?
Fitment cannot be confirmed from voltage or size alone. AZ describes it as a 22 mm coil; a 9 mm inner diameter is also listed elsewhere but should be verified. Provide the valve model, equipment serial number and existing coil measurements before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.