Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
AZ Pneumatica 00.167.0 - 12V DC Solenoid Coil 9mm ID
connectorPart number: 00.167.0
A published reference 00.167.0 is a 12 V DC solenoid coil in the 22 mm range, rated at 3 W. It has a listed 9 mm bore, ED 100% duty and IP65 protection when the connector is correctly mounted. Confirm valve and equipment details before ordering.
Looking for AZ Pneumatica 00.167.0? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | AZ Pneumatica |
|---|---|
| Part number | 00.167.0 |
| Category | Electrical & controls |
| Published designation | AZ Pneumatica 00.167.0 - 12V DC Solenoid Coil 9mm ID |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Rated voltage | 12 V DC |
| Rated power | 3 W |
| Coil size designation | 22 mm |
| Bore diameter | 9 mm |
| Maximum working temperature | +50 °C |
| Duty cycle | ED 100% |
| Voltage tolerance | ±10% |
| Ingress protection | IP65 with connector correctly mounted |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What voltage and power does the 00.167.0 coil require?
The coil is rated for 12 V DC and 3 W at steady state. The specified voltage tolerance is ±10%; do not select it solely by physical size.
What are the coil size and bore diameter?
AZ lists 00.167.0 in its 22 mm coil range. The bore is listed as 9 mm; the 22 mm designation is not the bore diameter. Confirm dimensions against the existing coil before ordering.
Can the 00.167.0 coil operate continuously, and what is its temperature limit?
The coil is specified for ED 100% duty and a maximum working temperature of +50 °C. Confirm the conditions of the intended installation before use.
Is the 00.167.0 coil rated IP65?
The stated IP65 protection applies with the connector correctly mounted. The rating should not be assumed for an unconnected coil.
Will the 00.167.0 replace the coil on my valve?
Fitment cannot be established from voltage and bore alone. Provide the valve model, equipment serial number, existing coil markings and connector details for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.