Images are for reference only. The supplied part’s appearance may differ.
Berarma 02-PVS2-31-F-H-R-M Variable Displacement Hydraulic Vane Pump
HydraulicsPart number: 02-PVS2-31-F-H-R-M
The Berarma 02-PVS2-31-F-H-R-M is a PVS series variable displacement hydraulic vane pump with mechanical pressure regulation. Published data lists 34.5 cm³/rev actual displacement, a 30–100 bar pressure setting range, clockwise rotation and NBR seals. Confirm the complete configuration and machine fitment before ordering.
Looking for Berarma 02-PVS2-31-F-H-R-M? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Berarma |
|---|---|
| Part number | 02-PVS2-31-F-H-R-M |
| Category | Hydraulics |
| Published designation | Berarma 02-PVS2-31-F-H-R-M Variable Displacement Hydraulic Vane Pump |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Pump type | Variable displacement hydraulic vane pump |
| Pressure control | Mechanical pressure regulation |
| Actual displacement | 34.5 cm³/rev |
| Pressure setting range | 30–100 bar |
| Maximum working pressure | 100 bar |
| Rotation | Clockwise |
| Seal material | NBR rubber |
| Speed range | 800–1800 rpm |
| Maximum drain port pressure | 1 bar |
| Drain port | 1/2 inch BSP |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What is the displacement of the Berarma 02-PVS2-31-F-H-R-M?
The published actual displacement is 34.5 cm³ per revolution. The 31 in the model designation should not be assumed to be the same figure as the actual displacement.
What pressure range does the 02-PVS2-31-F-H-R-M pump support?
The published control pressure setting range is 30–100 bar, with a maximum working pressure of 100 bar. Confirm the required setting and operating conditions for the hydraulic circuit before ordering.
What rotation and seal material does this Berarma pump have?
The published specification lists clockwise rotation and NBR rubber seals. Confirm the drive direction and fluid compatibility for the particular installation before ordering.
Will the 02-PVS2-31-F-H-R-M fit my machine?
Fitment cannot be established from the pump reference alone. Compare the complete pump nameplate, mounting, shaft and connections, and provide the equipment model and serial number for verification before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.