Technical illustration. Manufacturer technical illustration; dimensions/variant may differ. Images are for reference only. The supplied part’s appearance may differ.
1500 Series Cable Spring Reel, Hazardous Duty, Lift/Drag, 10 AWG / 4 Conductor SOOW-A Cable, 40FT Length
springPart number: XA-152100404011
Conductix-Wampfler XA-152100404011 is a 1500 Series hazardous-duty spring cable reel configured for lift/drag use. It is listed with 40 ft of 10 AWG, four-conductor cable, a spring-activated ratchet, an adjustable four-roller guide, a ball stop and a 6 ft fixed-end feeder cord. The manufacturer describes the cable as SOOW-A in the product title and SOW-A in the standard features; confirm the supplied cable marking. Verify the reel and cable ratings, hazardous-area marking and mounting requirements for the installation.
Looking for Conductix-Wampfler XA-152100404011? This catalogue reference is listed under spring. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Conductix-Wampfler |
|---|---|
| Part number | XA-152100404011 |
| Category | Cable management & power transfer |
| Published weight | 87.75 lb |
| Published designation | 1500 Series Cable Spring Reel, Hazardous Duty, Lift/Drag, 10 AWG / 4 Conductor SOOW-A Cable, 40FT Length |
| Published technical description | Standard Features • SOW-A cable, on all reels • Spring activated ratchet • 4 roller adjustable cable guide and ball stop • Built to UL 508C table 36.1 / NEC Standards • 6’ feeder cord on fixed end • Indoor or outdoor use • 35 amp, 1-4 conductors 600 Volt, 5-12 conductors 250 Volt • Rugged fabricated steel and cast aluminum construction • Threaded cast aluminum slip ring enclosure • Gray epoxy finish on steel parts UL Hazardous Location Listings • 3 and 4 conductor models with cable installed only • Class I Division 1, Groups C & D (flammable gases or vapors) • Class II Division 1, Groups E, F, & G (combustible dusts) • Class III Division 1 (easily-ignitable fibers or flyings) • Class I Zone 1: AEx d IIB, EX d IIB • Conforms to NEMA 9 and NEMA 4 (IP56) standards You may need to download a .step file viewer to see the attached CAD drawing. Downloads Cut Sheet (EN) CAD Drawing |
| Reference status | Published catalogue reference; confirm specification and fitment before ordering |
| Availability | On request |
| Series | 1500 Series |
| Reel drive | Spring driven |
| Cable size | 10 AWG |
| Cable conductors | 4 |
| Cable length | 40 ft |
| Cable designation | SOOW-A in product title; SOW-A in standard-features text; confirm supplied cable marking |
| Fixed-end feeder cord length | 6 ft |
| Cable guide | Adjustable four-roller guide with ball stop |
| Ratchet | Spring activated |
| Construction | Fabricated steel and cast aluminum; threaded cast aluminum slip ring enclosure |
| Finish | Gray epoxy on steel parts |
| Environment | Indoor or outdoor use |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What cable comes with XA-152100404011?
The manufacturer identifies this reel with 40 ft of 10 AWG, four-conductor cable. Its product title calls the cable SOOW-A, while the standard-features text says SOW-A. Confirm the cable marking and supplied construction before ordering.
Is this reel suitable for a hazardous location?
Conductix-Wampfler lists hazardous-location classifications for three- and four-conductor models with cable installed, including Class I Division 1 Groups C and D, and Class II Division 1 Groups E, F and G. Confirm the supplied reel marking and its suitability for the specific site classification before use.
What electrical rating should I check for this 10/4 cable reel?
The manufacturer lists 35 A and 600 V for the series configuration with one to four conductors, but this does not establish the allowable current of the complete installed cable assembly. Verify the actual reel and cable nameplate ratings and the application requirements before selection.
What features help guide and stop the cable?
The manufacturer lists a spring-activated ratchet, an adjustable four-roller cable guide and a ball stop. It also lists a 6 ft feeder cord on the fixed end. Confirm the mounting and cable travel requirements for your installation.
How do I verify this reel is right for my equipment?
This is a lift/drag configuration with 40 ft of 10 AWG, four-conductor cable. Match the cable, required travel, electrical and hazardous-area requirements and mounting arrangement. If replacing an existing reel, provide its model and serial number for verification; compatibility is not established by the cable size alone.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.