Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Danfoss Aeroquip 23.4MM OD X 12.7MM ID Hydraulic Hose SAE 100R5 1503-10
hosePart number: 1503-10
Danfoss Aeroquip 1503-10 is an SAE 100R5 hydraulic hose with a 12.7 mm inside diameter and 23.4 mm outside diameter. It has a synthetic rubber tube, textile inner braid, single wire braid reinforcement and black textile braid cover. Confirm fluid compatibility, fittings and equipment requirements before ordering.
Looking for Danfoss Aeroquip 1503-10? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Danfoss Aeroquip |
|---|---|
| Part number | 1503-10 |
| Category | Hydraulics |
| Published designation | Danfoss Aeroquip 23.4MM OD X 12.7MM ID Hydraulic Hose SAE 100R5 1503-10 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Inside diameter | 12.7 mm (0.50 in) |
| Outside diameter | 23.4 mm (0.92 in) |
| Maximum operating pressure | 122 bar (1,750 psi) |
| Minimum burst pressure | 490 bar (7,000 psi) |
| Minimum bend radius | 139.7 mm (5.50 in) |
| Hose standard | SAE 100R5 |
| Tube material | Synthetic rubber |
| Reinforcement | Textile inner braid and single wire braid |
| Cover | Black textile braid |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What are the inside and outside diameters of Aeroquip 1503-10?
The listed inside diameter is 12.7 mm (0.50 in) and the outside diameter is 23.4 mm (0.92 in). Check both dimensions and the hose designation when replacing an existing line.
What are the working pressure and minimum bend radius of 1503-10?
The listed maximum operating pressure is 122 bar (1,750 psi), and the minimum bend radius is 139.7 mm (5.50 in). The listed minimum burst pressure is 490 bar (7,000 psi); burst pressure is not a working-pressure rating.
Can 1503-10 hose carry hydraulic oil, fuel or air?
The 1503 hose is listed for hydraulic service, air, gasoline, fuel and lubricating oils. Confirm compatibility with the specific fluid and operating conditions before use; published temperature limits differ, so verify the applicable limit for the hose supplied.
Will 1503-10 fit my machine and existing hose ends?
Equipment fitment and specific hose-end compatibility cannot be established from the part number alone. Provide the equipment model and serial number, hose length, connection details and system requirements so the hose and fittings can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.