Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Danfoss Aeroquip 44.5MM OD X 35.1MM ID Hydraulic Hose SAE 100R5 1503-24
hosePart number: 1503-24
Danfoss Aeroquip 1503-24 is a single-wire-braid SAE 100R5 hydraulic hose with a synthetic rubber tube, textile inner braid and black textile braid cover. Published dimensions are approximately 35.1 mm inside diameter and 44.5 mm outside diameter. Confirm the hose and end fittings against the intended equipment and operating conditions.
Looking for Danfoss Aeroquip 1503-24? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Danfoss Aeroquip |
|---|---|
| Part number | 1503-24 |
| Category | Hydraulics |
| Published designation | Danfoss Aeroquip 44.5MM OD X 35.1MM ID Hydraulic Hose SAE 100R5 1503-24 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Hose inside diameter | 35.1 mm (1.38 in), approximate |
| Hose outside diameter | 44.5 mm (1.75 in), approximate |
| Maximum operating pressure | 35 bar (500 psi) |
| Minimum burst pressure | 140 bar (2,000 psi) |
| Minimum bend radius | 266.7 mm (10.5 in) |
| Vacuum rating | 50.8 kPa (15 inHg) vacuum; applicable only to hose without external damage or kinking |
| Tube material | Synthetic rubber |
| Reinforcement | Textile inner braid and single wire braid |
| Cover | Black textile braid |
| Hose designation | SAE 100R5 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What are the inside and outside diameters of Aeroquip 1503-24?
The published hose dimensions are approximately 35.1 mm (1.38 in) inside diameter and 44.5 mm (1.75 in) outside diameter. Confirm dimensions and tolerances for the supplied hose before selecting fittings.
What are the pressure rating and minimum bend radius of 1503-24?
The published maximum operating pressure is 35 bar (500 psi), and the minimum bend radius is 266.7 mm (10.5 in). The minimum burst pressure is 140 bar (2,000 psi); burst pressure is not a working-pressure rating.
Can 1503-24 be used for vacuum service?
The published vacuum rating is 50.8 kPa (15 inHg) of vacuum. For size -24, this rating applies only to hose without external damage or kinks. Confirm suitability for the actual vacuum and installation before ordering.
Will 1503-24 fit my equipment and which fittings should I use?
Equipment fitment and end fittings are not established by the hose part number alone. Provide the equipment model and serial number, existing hose markings, required length, fluid, operating pressure and end connections so the complete assembly can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.