Images are for reference only. The supplied part’s appearance may differ.
Danfoss Synflex 3/16" ID Hydraulic Hose 2 Yarn Thermoplastic SAE100R7 37AL-03
hosePart number: 37AL-03
Danfoss Synflex 37AL-03 is a nominal 3/16-inch medium-pressure thermoplastic hydraulic hose with non-conductive construction. It is identified as SAE 100R7 hose and has an orange cover. Confirm fluid, fittings and equipment requirements before ordering.
Looking for Danfoss Synflex 37AL-03? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Danfoss Synflex |
|---|---|
| Part number | 37AL-03 |
| Category | Hydraulics |
| Published designation | Danfoss Synflex 3/16" ID Hydraulic Hose 2 Yarn Thermoplastic SAE100R7 37AL-03 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Nominal inside diameter | 3/16 in (4.8 mm) |
| Maximum outside diameter | 10.8 mm |
| Maximum working pressure | 207 bar (3,000 psi) |
| Minimum bend radius | 19 mm (3/4 in) |
| Temperature range | -54°C to +100°C; maximum +60°C with water-based or fire-resistant fluids |
| Hose construction | Non-conductive thermoplastic hose |
| Cover colour | Orange |
| Hose standard | SAE 100R7 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size and working pressure is the 37AL-03 hydraulic hose?
The 37AL-03 is a nominal 3/16-inch bore hose. Published 37AL-03 size data gives a 10.8 mm maximum outside diameter and a 207 bar (3,000 psi) maximum working pressure. Verify the complete assembly and system requirements before selection.
Is 37AL-03 non-conductive, and can it be used on an aerial lift?
The hose is described as non-conductive, and the 37AL series is listed for utility-truck and aerial-device hydraulics. This does not establish suitability for a particular lift or guarantee electrical safety of an assembled hose. Provide the equipment model and serial number, fluid and assembly details for verification.
What temperature range applies to 37AL-03 with water-based hydraulic fluid?
Published 37AL series data gives a general range of -54°C to +100°C, with a lower +60°C maximum for water-based or fire-resistant fluids. Confirm the specific fluid and its compatibility before use; temperature limits alone do not establish chemical compatibility.
Which fittings are listed for 37AL-03 hose?
The published 37AL fitting chart lists the 903 permanent fitting series and 4540-303 swage die for 37AL-03. Confirm the exact fitting, assembly requirements and current manufacturer instructions before ordering or making an assembly.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.