Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Danfoss Eaton Aeroquip 1A10DLB6 12L SW/90 M18 x 1.5 DKO x 3/8" ID Hose Insert One Piece Fitting
hosePart number: 1A10DLB6
Eaton Aeroquip 1A10DLB6 is a one-piece Global TTC hydraulic hose crimp fitting with a 90-degree elbow. It has a 3/8-inch dash -6 hose connection and a 12L female DKO swivel with M18 x 1.5 thread and a 24-degree cone. The fitting is carbon steel with Dura-Kote finish. Confirm the hose series, mating connection and assembly requirements before ordering.
Looking for Eaton Aeroquip 1A10DLB6? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Aeroquip |
|---|---|
| Part number | 1A10DLB6 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Aeroquip 1A10DLB6 12L SW/90 M18 x 1.5 DKO x 3/8" ID Hose Insert One Piece Fitting |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Fitting series | Global TTC, 1A series |
| Construction | One-piece crimp fitting |
| Elbow angle | 90 degrees |
| Hose inside diameter | 3/8 in (dash -6) |
| Thread size | M18 x 1.5 |
| Connection | Female DKO swivel, 12L light series |
| Cone angle | 24 degrees |
| Material | Carbon steel |
| Finish | Dura-Kote |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What thread and sealing connection does 1A10DLB6 have?
It has a female light-series 12L DKO swivel with an M18 x 1.5 thread and a 24-degree cone with an O-ring seal. Check the mating connection and seal before ordering.
What hose size does the 1A10DLB6 fitting take?
The hose end is for a 3/8-inch inside-diameter, dash -6 hose. Hose diameter alone does not establish compatibility: confirm the exact hose series and the approved fitting and crimp combination.
Is 1A10DLB6 reusable or a permanent crimp fitting?
It is a one-piece Global TTC crimp fitting with a 90-degree elbow, intended for a crimped hose assembly. Confirm the correct hose and crimp equipment before assembly; do not assume the fitting is reusable.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.