Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Danfoss Eaton Aeroquip 1A40DLB24 L42 FEM SW/90 M52 x 2.0 DKO x 1.1/2" ID Hose Tail One Piece Fitting
hosePart number: 1A40DLB24
Eaton Aeroquip 1A40DLB24 is a one-piece Global TTC hydraulic hose crimp fitting with a 90-degree L42 DKO female swivel and M52 x 2.0 thread. It is specified for -24 hose with a 1-1/2 inch inside diameter and has a carbon steel body with Dura-Kote finish. Confirm the hose and mating connection before ordering.
Looking for Eaton Aeroquip 1A40DLB24? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Aeroquip |
|---|---|
| Part number | 1A40DLB24 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Aeroquip 1A40DLB24 L42 FEM SW/90 M52 x 2.0 DKO x 1.1/2" ID Hose Tail One Piece Fitting |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Fitting type | One-piece crimp fitting |
| Connection | DKO female swivel, light series (L42) |
| Thread | M52 x 2.0 |
| Elbow angle | 90 degrees |
| Hose size | -24; 1-1/2 in inside diameter |
| Tube outside diameter | 42 mm |
| Material | Carbon steel |
| Finish | Dura-Kote |
| Series | Global TTC |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What connection does the 1A40DLB24 fitting have?
It has an L42 light-series DKO female swivel with an M52 x 2.0 metric thread and a 90-degree elbow. The DKO connection uses a 24-degree cone and O-ring seal. Check the mating connection and seal before ordering.
What hose size is specified for 1A40DLB24?
The fitting is listed for a -24 hose with a 1-1/2 inch inside diameter. Hose size alone does not establish compatibility: confirm the exact hose construction and series, as well as the approved fitting and crimp combination.
Will this fitting work on my machine?
Machine-specific fitment is not established by the part number alone. Compare the connection, hose and pressure requirements with the existing assembly; provide the equipment model and serial number and the hose markings for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.