Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1005-009 Hydraulic Torque Motor MH0113BA01AB0000000000J0
hydraulic motorPart number: 101-1005-009
The Eaton Char-Lynn 101-1005-009 is an H Series orbital hydraulic motor with a spool valve and gerotor gear set. It has a 185 cm³/rev (11.3 in³/rev) displacement, a square four-bolt flange, a 1-inch straight shaft with Woodruff key, and aligned 1/2-14 NPTF side ports. Confirm equipment serial number, mounting, shaft and hydraulic connections before ordering.
Looking for Eaton Char-Lynn 101-1005-009? This catalogue reference is listed under hydraulic motor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1005-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1005-009 Hydraulic Torque Motor MH0113BA01AB0000000000J0 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Motor series | H Series |
| Motor design | Spool valve, gerotor |
| Geometric displacement | 185 cm³/rev (11.3 in³/rev) |
| Mounting flange | Square, 4-bolt |
| Mounting pilot | 44.4 mm diameter × 3.1 mm height |
| Mounting bolt circle | 82.6 mm diameter; 3/8-16 UNC-2B mounting holes |
| Output shaft | 1 in diameter, straight, Woodruff key; 1/4-20 UNC-2B shaft-end thread |
| Main ports | Aligned side ports, 1/2-14 NPTF |
| Drain port | None |
| Shaft seal | Standard NBR |
| Bearings | Front and rear journal bearings |
| Overall dimensions | 182.880 mm length × 84.074 mm width × 98.298 mm height |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What type of hydraulic motor is the 101-1005-009 and what is its displacement?
It is a Char-Lynn H Series orbital motor with a spool valve and gerotor gear set. Its geometric displacement is 185 cm³ per revolution (11.3 in³ per revolution).
What shaft and mounting flange does the 101-1005-009 use?
It has a 1-inch diameter straight shaft with a Woodruff key and a square four-bolt flange. Danfoss lists a 44.4 mm pilot diameter and an 82.6 mm bolt circle; check the mating dimensions before ordering.
What hydraulic ports and drain connection does this motor have?
Danfoss specifies aligned side ports with 1/2-14 NPTF main-port threads and lists no drain port. Verify the existing connections and hydraulic circuit before replacement.
Can this motor replace the drive motor on my lift?
A forum owner reported using 101-1005-009 motors on an older lift, but that observation does not establish fitment for another machine. Provide the equipment make, model and serial number, plus the existing motor nameplate and connection details, for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.