Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1009-009 Hydraulic Torque Motor MH0028BA01AA0000000000000AA00J
o-ringPart number: 101-1009-009
The Eaton Char-Lynn 101-1009-009 is a Danfoss H Series orbital hydraulic torque motor, model code MH0028BA01AA0000000000000AA00J. It has a spool valve and gerotor gear set, with a geometric displacement of 46 cm³/rev (2.8 in³/rev). Its configuration includes a square four-bolt flange, a 1-inch straight shaft with Woodruff key, and aligned side SAE O-ring ports. Confirm the equipment serial number, existing motor identification and hydraulic requirements before ordering.
Looking for Eaton Char-Lynn 101-1009-009? This catalogue reference is listed under o-ring. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1009-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1009-009 Hydraulic Torque Motor MH0028BA01AA0000000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Motor series | H Series |
| Valve and gear set | Spool valve; gerotor |
| Geometric displacement | 46 cm³/rev (2.8 in³/rev) |
| Mounting flange | Square four-bolt; pilot 44.4 mm diameter × 3.1 mm height; bolt circle 82.6 mm; 3/8-16 UNC-2B mounting holes |
| Output shaft | 1 in diameter straight shaft; Woodruff key; 1/4-20 UNC-2B thread in shaft end |
| Main ports | Aligned side ports; 7/8-14 UNF-2B SAE O-ring |
| Drain port | None |
| Shaft seal | Standard NBR |
| Seal kit | 60540-000 |
| Bearings | Front and rear journal bearings |
| Product dimensions | Length 163.830 mm; width 84.074 mm; height 98.298 mm |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What type and displacement is the Char-Lynn 101-1009-009 motor?
It is an H Series orbital hydraulic motor with a spool valve and gerotor gear set. Danfoss specifies a geometric displacement of 46 cm³ per revolution (2.8 in³ per revolution).
What mounting flange and shaft does the 101-1009-009 have?
It has a square four-bolt flange with a 44.4 mm (1.75 in) pilot diameter and an 82.6 mm (3.25 in) bolt circle. The straight shaft is 1 in in diameter, uses a Woodruff key and has a 1/4-20 UNC-2B thread in the end. Check the existing motor's dimensions before ordering.
What hydraulic ports does the 101-1009-009 use, and is there a drain port?
Danfoss specifies aligned side ports with 7/8-14 UNF-2B SAE O-ring connections and lists no drain port. Verify the existing connections and hydraulic circuit requirements before ordering.
Will the 101-1009-009 fit my equipment or replace my existing motor?
Fitment cannot be established from the equipment name alone. Supply the equipment make, model and serial number, plus the old motor's complete nameplate number. Compare displacement, flange, shaft, ports and hydraulic requirements before selecting a replacement. A forum discussion suggests this motor for an auger application, but that suggestion does not verify fitment.
Which seal kit is specified for the 101-1009-009?
Danfoss lists seal kit 60540-000 for this exact motor and identifies its standard shaft seal as NBR. Confirm the complete motor identification and repair requirements before ordering a kit.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.