Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1010-009 Hydraulic Torque Motor MH0045BA01AA0000000000000AA00J
hydraulic motorPart number: 101-1010-009
The Char-Lynn 101-1010-009 is an H Series orbital hydraulic motor, model code MH0045BA01AA0000000000000AA00J. It uses a spool valve and gerotor with a geometric displacement of 74 cm³/rev (4.5 in³/rev). It has a square four-bolt flange, a 1-inch straight shaft with Woodruff key, and aligned 7/8-14 UNF-2B SAE O-ring side ports. Confirm the motor configuration and equipment fitment before ordering.
Looking for Eaton Char-Lynn 101-1010-009? This catalogue reference is listed under hydraulic motor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1010-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1010-009 Hydraulic Torque Motor MH0045BA01AA0000000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Motor series | H Series |
| Motor type | Orbital motor with spool valve and gerotor |
| Geometric displacement | 74 cm³/rev (4.5 in³/rev) |
| Mounting flange | Square, four-bolt |
| Mounting pilot | 44.4 mm diameter × 3.1 mm height (1.75 × 0.12 in) |
| Mounting bolt circle | 82.6 mm (3.25 in) |
| Mounting hole thread | 3/8-16 UNC-2B |
| Output shaft | 1 in diameter straight shaft with Woodruff key |
| Shaft end thread | 1/4-20 UNC-2B |
| Main ports | Aligned side ports, 7/8-14 UNF-2B SAE O-ring |
| Drain port | None |
| Shaft seal | Standard NBR |
| Bearings | Front and rear journal bearings |
| Dimensions | Length 167.640 mm; width 84.074 mm; height 98.298 mm |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What type of hydraulic motor is 101-1010-009, and what is its displacement?
It is an H Series orbital motor with a spool valve and gerotor gear set. Its geometric displacement is 74 cm³ per revolution (4.5 in³ per revolution).
What shaft and mounting flange does 101-1010-009 have?
It has a 1-inch straight shaft with a Woodruff key and a 1/4-20 UNC-2B threaded shaft end. The square four-bolt flange has a 1.75-inch pilot and a 3.25-inch bolt circle; mounting holes are 3/8-16 UNC-2B.
What hydraulic ports does this motor use, and is there a drain port?
The aligned side ports are 7/8-14 UNF-2B SAE O-ring ports. Danfoss lists no drain port for this configuration.
Will 101-1010-009 fit my car wash or other equipment?
Fitment cannot be confirmed from equipment type alone. A a published reference discusses this number as a possible replacement, but that is not verified fitment. Provide the machine model and serial number, the old motor nameplate and mounting, shaft and port details for confirmation.
Which shaft seal and seal kit are specified for 101-1010-009?
Danfoss lists a standard NBR shaft seal and identifies seal kit 60540-000 for this motor. Confirm the motor identification before ordering repair parts.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.