Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1065-009 Hydraulic Torque Motor MH0028BA02AC0000000000000AA00J
hydraulic motorPart number: 101-1065-009
The Danfoss Eaton Char-Lynn 101-1065-009 is an H Series orbital hydraulic motor with a spool valve and gerotor gear set. It has 46 cm³/rev displacement, a square four-bolt flange, a 1-inch SAE 6B splined shaft and aligned side manifold ports. Confirm the motor identification and equipment serial number before ordering.
Looking for Eaton Char-Lynn 101-1065-009? This catalogue reference is listed under hydraulic motor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1065-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1065-009 Hydraulic Torque Motor MH0028BA02AC0000000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Motor series | H Series |
| Valve system | Spool valve |
| Orbital gear set | Gerotor |
| Geometric displacement | 46 cm³/rev (2.8 in³/rev) |
| Mounting flange | Square, 4 bolt; 3/8-16 UNC-2B mounting holes |
| Mounting pilot | 44.4 mm diameter × 3.1 mm height |
| Mounting bolt circle | 82.6 mm (3.25 in) |
| Output shaft | 1 in diameter, SAE 6B splined; 1/4-20 UNC-2B shaft-end thread |
| Main ports | Aligned side manifold ports; 0.500 in drilled hole; four 5/16-18 UNC-2B mounting threads |
| Drain port | None |
| Shaft seal | Standard NBR |
| Design code | 09 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What is the displacement and motor type of 101-1065-009?
It is a Char-Lynn H Series orbital hydraulic motor with a spool valve and gerotor gear set. Its geometric displacement is 46 cm³ per revolution (2.8 in³/rev).
What mounting and shaft does the 101-1065-009 motor use?
It has a square four-bolt mount with 3/8-16 UNC-2B holes and a 1-inch SAE 6B splined shaft. The pilot is 44.4 mm in diameter and the bolt circle is 82.6 mm.
What hydraulic ports does 101-1065-009 have?
The motor has aligned side manifold ports with a 0.500-inch drilled hole and four 5/16-18 UNC-2B mounting threads. Danfoss lists no drain port.
How can I check whether 101-1065-009 fits my equipment?
Fitment cannot be confirmed from the motor number alone. Compare the existing motor nameplate, mounting, shaft and manifold connections; provide the equipment model and serial number for verification before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.