Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1066-009 Hydraulic Torque Motor MH0045BA02AC0000000000000AA00J
HydraulicsPart number: 101-1066-009
Eaton Char-Lynn 101-1066-009 is an H Series hydraulic torque motor with model code MH0045BA02AC0000000000000AA00J. It has a 74 cm³/rev displacement, a standard four-bolt mounting, a 1-inch SAE 6B splined shaft and manifold ports. Confirm the motor identification, interface dimensions and equipment serial number before ordering.
Looking for Eaton Char-Lynn 101-1066-009? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1066-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1066-009 Hydraulic Torque Motor MH0045BA02AC0000000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Series | H Series |
| Displacement | 74 cm³/rev (4.5 in³/rev) |
| Mounting | Standard 4-bolt; 44.40 mm pilot diameter; 3/8-16 UNC-2B mounting holes on 82.55 mm bolt circle |
| Output shaft | 25.4 mm diameter SAE 6B spline; 1/4-20 UNC-2B shaft-end hole |
| Port type | Manifold ports; 5/16-18 UNC-2B mounting holes |
| Flow rate | 57 L/min |
| Maximum speed | 760 rpm |
| Maximum intermittent pressure | 165 bar |
| Seal option | Standard seals |
| Speed sensor | None |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
How can I check whether 101-1066-009 fits my equipment?
Match the complete motor nameplate and model code MH0045BA02AC0000000000000AA00J, then check the shaft, mounting and manifold ports. Fitment cannot be confirmed from the equipment type alone; provide the machine model and serial number and a nameplate photo for verification.
What shaft and mounting does the 101-1066-009 motor have?
It has a 25.4 mm (1 inch) SAE 6B splined shaft and a standard four-bolt mounting. The mounting pilot is 44.40 mm in diameter, with 3/8-16 UNC-2B mounting holes on an 82.55 mm bolt circle. Check these dimensions against the existing motor.
What hydraulic ports and displacement does this motor have?
The 101-1066-009 has manifold ports with 5/16-18 UNC-2B mounting holes and a displacement of 74 cm³ per revolution. Verify the manifold interface before ordering; the mounting-hole thread is not a hose-port thread size.
What flow and speed are listed for the 101-1066-009?
The published specifications list 57 L/min flow and a maximum speed of 760 rpm. Check the complete operating conditions and hydraulic system requirements before selecting the motor; these figures alone do not establish suitability.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.