Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1644-009 Hydraulic Torque Motor MH0028FA24AF0200000000000AA00J
HydraulicsPart number: 101-1644-009
Eaton Char-Lynn 101-1644-009 is an H series hydraulic torque motor with 46 cm³/rev displacement. It has a four-bolt mounting, a 25 mm straight keyed shaft, G 1/2 BSP working ports and a G 1/4 BSP end-cap case flow port. Model code: MH0028FA24AF0200000000000AA00J. Verify the motor details and equipment serial number before ordering.
Looking for Eaton Char-Lynn 101-1644-009? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1644-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1644-009 Hydraulic Torque Motor MH0028FA24AF0200000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Series | H series |
| Displacement | 46 cm³/rev |
| Mounting | Four-bolt; M10 × 1.5-6H holes on 82.55 mm bolt circle |
| Mounting pilot | 44.40 mm diameter × 3.05 mm |
| Output shaft | 25 mm diameter straight shaft, 8 mm key; M8 × 1.25-6H shaft-end hole |
| Working ports | G 1/2 BSP straight thread |
| Case flow port | G 1/4 BSP straight thread, end cap |
| Seal option | Standard seals |
| Design code | 9 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What displacement and motor series is the 101-1644-009?
The 101-1644-009 is an H series hydraulic motor with a displacement of 46 cm³ per revolution. Its published model code is MH0028FA24AF0200000000000AA00J.
What shaft and mounting dimensions should I check for a replacement?
The listed motor has a 25 mm straight shaft with an 8 mm key and a four-bolt mount. Mounting holes are M10 × 1.5 on an 82.55 mm bolt circle, with a 44.40 mm pilot. Compare these dimensions and the motor nameplate before ordering.
What hydraulic ports and case drain does 101-1644-009 have?
The published specification identifies G 1/2 BSP straight-thread working ports and a G 1/4 BSP straight-thread case flow port in the end cap. Verify the connections against the existing motor and hydraulic system.
Will the 101-1644-009 fit my equipment?
Fitment cannot be established from the motor number alone. Provide the equipment make, model and serial number, plus the existing motor nameplate and connection details, so the mounting, shaft and hydraulic requirements can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.