Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Danfoss Eaton Char-Lynn 101-1662-009 Hydraulic Torque Motor MH0059AA24AF0200000000000AA00J
hydraulic motorPart number: 101-1662-009
The Eaton Char-Lynn 101-1662-009 is an H Series orbital hydraulic motor with a spool valve and gerotor gear set. It has a 96 cm³/rev displacement, a 25 mm straight keyed shaft, a two-bolt flange, G 1/2 BSP side ports and a G 1/4 drain port. Confirm equipment and existing motor details before ordering.
Looking for Eaton Char-Lynn 101-1662-009? This catalogue reference is listed under hydraulic motor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Eaton Char-Lynn |
|---|---|
| Part number | 101-1662-009 |
| Category | Hydraulics |
| Published designation | Danfoss Eaton Char-Lynn 101-1662-009 Hydraulic Torque Motor MH0059AA24AF0200000000000AA00J |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Motor series | H Series |
| Motor type | Orbital motor, spool valve, gerotor |
| Geometric displacement | 96 cm³/rev (5.9 in³/rev) |
| Mounting flange | 2-bolt A; 82.5 mm pilot diameter × 3.1 mm height; 106.4 mm bolt circle; 13.6 mm holes |
| Output shaft | 25 mm diameter straight shaft; M8 × 1.25-6H shaft-end thread |
| Shaft key | 8 × 30 mm square key |
| Main ports | G 1/2 BSP, aligned side ports |
| Drain port | G 1/4 |
| Shaft seal | Standard NBR |
| Product dimensions | Length 170.688 mm; width 133.858 mm; height 98.298 mm |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What displacement and motor type is 101-1662-009?
It is an H Series orbital hydraulic motor with a spool valve and gerotor gear set. Its geometric displacement is 96 cm³ per revolution (5.9 in³/rev).
What shaft and mounting flange does this motor have?
It has a straight 25 mm shaft with an 8 × 30 mm square key and an M8 × 1.25-6H shaft-end thread. The two-bolt mounting flange has an 82.5 mm pilot and a 106.4 mm bolt circle.
What are the main and case drain port sizes?
The aligned side main ports are G 1/2 BSP. The motor also has a G 1/4 drain port in the end cap. Confirm the connections against your existing unit before ordering.
Will the 101-1662-009 fit my equipment?
Fitment cannot be established from the motor number alone. Provide the equipment make, model and serial number, plus the existing motor nameplate and photos, so the shaft, flange, ports and hydraulic requirements can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.