Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Elettrotec 10BAR M12 4-20MA Pressure Trans G1/4 PTE10GA-IMR14316
connectorPart number: PTE10GA-IMR14316
The a published reference PTE10GA-IMR14316 is a pressure transducer with a published 0–10 bar working range and 4–20 mA output. It has an M12 electrical connector and a male G1/4 BSP parallel process connection. The listed material is AISI 316 stainless steel. Confirm the electrical details and application fit before ordering.
Looking for Elettrotec PTE10GA-IMR14316? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Elettrotec |
|---|---|
| Part number | PTE10GA-IMR14316 |
| Category | Hydraulics |
| Published designation | Elettrotec 10BAR M12 4-20MA Pressure Trans G1/4 PTE10GA-IMR14316 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Working pressure range | 0 to 10 bar |
| Maximum working pressure | 15 bar |
| Output signal | 4–20 mA |
| Electrical connection | M12 connector |
| Process connection | G1/4 BSPP male |
| Material | AISI 316 stainless steel |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What pressure range does the PTE10GA-IMR14316 measure?
The published working pressure range is 0 to 10 bar. The listing also gives 15 bar as the maximum working pressure; do not treat that as the upper end of the measurement range. Confirm pressure limits for the actual application before ordering.
What electrical output and connector does this pressure transducer have?
This version is listed with a 4–20 mA current output and an M12 electrical connector. Confirm the supply voltage, pinout and mating connector for the exact unit before installation; the available listing does not reliably establish those details.
What process connection does the PTE10GA-IMR14316 use?
The published process connection is a male G1/4 BSP parallel thread. Check the mating port and sealing arrangement before ordering; a matching nominal size alone does not establish equipment compatibility.
Will this transducer replace the sensor on my equipment?
Fitment cannot be established from the part number alone. Compare the existing sensor’s complete part number, pressure range, electrical output and process connection, and provide the equipment model and serial number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.