Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Elettrotec 10BAR M12 0-10V Pressure Trans G1/4 PTE10GA-VMR14316
connectorPart number: PTE10GA-VMR14316
Elettrotec PTE10GA-VMR14316 pressure transducer with a 0–10 bar working pressure range and 0–10 V output. It has a male G1/4 BSP parallel pressure connection, an M12 male electrical connector and AISI 316 material. Verify the electrical requirements and equipment details before ordering.
Looking for Elettrotec PTE10GA-VMR14316? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Elettrotec |
|---|---|
| Part number | PTE10GA-VMR14316 |
| Category | Hydraulics |
| Published designation | Elettrotec 10BAR M12 0-10V Pressure Trans G1/4 PTE10GA-VMR14316 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Working pressure range | 0–10 bar |
| Maximum working pressure | 15 bar |
| Output signal | 0–10 V |
| Pressure connection | G1/4 BSPP male |
| Electrical connector | M12 male |
| Working temperature | −25 to +100 °C |
| Material | AISI 316 stainless steel |
| Ingress protection | IP67 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What pressure range and output does the PTE10GA-VMR14316 have?
This transducer is listed with a 0–10 bar working pressure range and a 0–10 V output. The listed maximum working pressure is 15 bar; this is not the same as its 10 bar measurement range.
What pressure connection and electrical connector does this transducer use?
The listed pressure connection is a male G1/4 BSP parallel thread. The electrical connection is an M12 male connector. Confirm the mating connector and wiring before ordering.
Can the PTE10GA-VMR14316 replace my existing pressure transducer?
Fitment is not established from the part number alone. Compare the pressure range, 0–10 V output, G1/4 male process connection and M12 connector, and confirm the electrical supply and wiring. Provide the equipment model and serial number and the existing sensor details for verification.
What temperature and material are listed for this pressure transducer?
The listed working temperature range is −25 to +100 °C, and the material is AISI 316 stainless steel. Confirm suitability for the intended medium and operating conditions before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.