Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Elettrotec 20BAR M12 0-10V Pressure Trans G1/4 PTE20GA-VMR14316
connectorPart number: PTE20GA-VMR14316
The a published reference PTE20GA-VMR14316 is a pressure transducer listed for a 0 to 20 bar working range with a 0–10 V output. It has an M12 electrical connector and a male G1/4 BSP parallel pressure connection. Confirm the connection details and equipment requirements before ordering.
Looking for Elettrotec PTE20GA-VMR14316? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Elettrotec |
|---|---|
| Part number | PTE20GA-VMR14316 |
| Category | Hydraulics |
| Published designation | Elettrotec 20BAR M12 0-10V Pressure Trans G1/4 PTE20GA-VMR14316 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Working pressure range | 0 to 20 bar |
| Output signal | 0 to 10 V |
| Pressure connection | G1/4 BSP parallel male |
| Electrical connection | M12 male connector; thread pitch requires confirmation |
| Material | AISI 316 stainless steel |
| Maximum pressure | 35 bar; operating limits should be confirmed |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What pressure range and output does the PTE20GA-VMR14316 have?
This pressure transducer is listed with a 0 to 20 bar working pressure range and a 0–10 V output. Check that both match the measurement range and input required by your control system.
What pressure connection does this transducer use?
The PTE20GA-VMR14316 is listed with a male 1/4-inch BSP parallel pressure connection, also described as G1/4. Verify the mating port and sealing arrangement before ordering.
Can this transducer replace the sensor on my equipment?
Equipment-specific fitment is not established. Compare the existing part number, pressure range, 0–10 V signal, electrical connection and pressure port. Provide the equipment model and serial number for verification before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.