Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Elettrotec 50BAR M12 4-20MA Pressure Trans G1/4 PTE50GA-IMR14316
connectorPart number: PTE50GA-IMR14316
The Elettrotec PTE50GA-IMR14316 is a pressure transducer listed for a 0–50 bar working range and a 4–20 mA output. It has a 1/4-inch male BSPP pressure connection and an M12 male electrical connector. Confirm connector details and equipment compatibility before ordering.
Looking for Elettrotec PTE50GA-IMR14316? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Elettrotec |
|---|---|
| Part number | PTE50GA-IMR14316 |
| Category | Hydraulics |
| Published designation | Elettrotec 50BAR M12 4-20MA Pressure Trans G1/4 PTE50GA-IMR14316 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Working pressure range | 0–50 bar |
| Output signal | 4–20 mA |
| Pressure connection | 1/4-inch BSPP male |
| Electrical connector | M12 male |
| Working temperature | −25 to +100 °C |
| Ingress protection | IP67 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What pressure range and output does PTE50GA-IMR14316 have?
The listed working pressure range is 0–50 bar, with a 4–20 mA output. Confirm the pressure range and signal requirements against your existing device before ordering.
What pressure and electrical connections does this transducer use?
The listed pressure connection is 1/4-inch male BSPP, and the electrical connection is an M12 male connector. The available listing gives inconsistent M12 thread pitches, so confirm the connector details before ordering.
Will this transducer replace the sensor on my equipment?
Equipment-specific fitment has not been established. Provide the equipment model and serial number, the existing sensor part number and connection details so compatibility can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.