Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
IC200ALG240-GC — Analog Input Module
Sensors & automationPart number: IC200ALG240-GC
The General Electric IC200ALG240-GC is a VersaMax analog input module with eight isolated inputs and 16-bit input data. It supports current and voltage input modes, with configurable channel scaling and diagnostic functions. Confirm the complete revision and installed system configuration before replacement.
Looking for General Electric IC200ALG240-GC? This catalogue reference is listed under Sensors & automation. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | General Electric |
|---|---|
| Part number | IC200ALG240-GC |
| Category | Sensors & automation |
| Item Type Name | Analog Input Module |
| Product Family / Series | VersaMax |
| number_of_channels | 8 isolated analog inputs |
| resolution | 16-bit |
| voltage_mode_range | ±10 V DC |
| current_mode_range | 4–20 mA |
| isolation_voltage | 250 V AC continuous; 1,500 V AC for 1 minute, channel-to-channel and input-to-logic/frame |
| digital_filter | Programmable digital notch at 50 or 60 Hz |
| backplane_power_5v | 15 mA maximum at 5 V |
| backplane_power_3.3v | 120 mA maximum at 3.3 V |
| Width | 110 mm |
| Height | 66.8 mm |
| Depth | 50 mm |
| Published component type | Analog Input Module |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| External field supply | 19.5–30 V DC; 100 mA maximum plus load currents |
| Diagnostics | High/low limits, over/underrange, open wire, field power loss and non-volatile memory fault |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What signals and resolution does the IC200ALG240-GC support?
The module has eight isolated analog inputs and 16-bit input data. It supports voltage and current modes, with listed ranges of ±10 V and 4–20 mA. Confirm the channel configuration and signal wiring against the installed system.
Can the IC200ALG240-GC be configured for different input signals and scaling?
The IC200ALG240 supports per-channel selection of current or voltage and channel scaling. The GC listing also identifies configurable scaling and alarm levels. Check the installed controller or network interface configuration before assuming settings will transfer.
Does the IC200ALG240-GC need a separate field power supply?
Yes. The IC200ALG240 field circuits require a separate 19.5–30 V DC supply, in addition to backplane power. Verify the supply, carrier and wiring against the documentation for the installed GC revision.
Can another revision replace an IC200ALG240-GC?
Interchangeability with another revision is not established by the part number alone. Compare the complete module marking, carrier, configuration and equipment records; provide the equipment model and serial number for verification before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.