Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
GF 1" X 3/4" BSPF Unequal Tee Galvanised GF130G GF130-1-34
HydraulicsPart number: GF130-1-34
GF GF130-1-34 is a galvanised malleable iron unequal tee, figure 130, with 1 inch and 3/4 inch female BSP parallel threads and a reduced branch. The published maximum working pressure is 25 bar and the working temperature range is -20°C to +120°C. Confirm suitability for the intended installation and operating conditions before ordering.
Looking for GF GF130-1-34? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | GF |
|---|---|
| Part number | GF130-1-34 |
| Category | Hydraulics |
| Published designation | GF 1" X 3/4" BSPF Unequal Tee Galvanised GF130G GF130-1-34 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Fitting type | Unequal tee, reducing on branch; figure 130 |
| Thread sizes | 1 inch x 3/4 inch |
| Thread type | BSP parallel female (BSPP) |
| Material | Malleable iron |
| Finish | Galvanised |
| Maximum working pressure | 25 bar |
| Working temperature | -20°C to +120°C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What thread sizes and configuration does GF130-1-34 have?
This is a branch-reducing unequal tee with 1 inch and 3/4 inch female BSP parallel threads. Check the thread sizes and configuration against the existing pipework before ordering.
What are the pressure and temperature limits for GF130-1-34?
The published maximum working pressure is 25 bar and the stated working temperature range is -20°C to +120°C. Confirm suitability for the actual medium and operating conditions before use.
What material and finish does the GF130-1-34 tee use?
The fitting is made from malleable iron and has a galvanised finish. Verify material compatibility with the intended fluid and environment before specifying it.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.