Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Havit 1" Socket Weld Flange AFS102S
o-ringPart number: AFS102S
Havit AFS102S is a 1-inch steel SAE hydraulic socket-weld flange with an O-ring groove and a listed 34 mm boss weld diameter. It belongs to the SAE 3000 psi series. Confirm the mating dimensions and allowable operating pressure for the complete assembly before ordering.
Looking for Havit AFS102S? This catalogue reference is listed under o-ring. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Havit |
|---|---|
| Part number | AFS102S |
| Category | Hydraulics |
| Published designation | Havit 1" Socket Weld Flange AFS102S |
| AFS | Flange with O-Ring Groove |
| GFS | Flange with Flat Face. |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Flange size | 1 inch |
| Connection | Socket weld; O-ring groove |
| Boss weld diameter | 34 mm |
| Pressure series | SAE 3000 psi |
| Material | Steel |
| Listed flange standards | ISO 6162-1; SAE J518 Code 61 |
| Listed bolt sizes | M10 x 35 mm or 3/8 inch UNC x 1-1/2 inch |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size and connection type is the Havit AFS102S?
AFS102S is a 1-inch SAE hydraulic socket-weld flange with an O-ring groove. Its listed boss weld diameter is 34 mm. Confirm the mating dimensions and pipe before ordering; the 1-inch designation is the flange size, not a pipe-thread designation.
What is the difference between AFS102S and AFS102S-A30?
Both are listed as 1-inch socket-weld flanges, but their listed boss weld diameters differ: 34 mm for AFS102S and 30.3 mm for AFS102S-A30. Check the required weld dimension rather than choosing by flange size alone.
Are bolts, washers and the O-ring included with AFS102S?
The published flange listing says bolts, washers and O-rings are not included. M10 x 35 mm and 3/8 inch UNC x 1-1/2 inch bolt sizes are listed; confirm the appropriate hardware and seal for the mating assembly before ordering.
What pressure can the AFS102S flange handle?
The flange is listed in the SAE 3000 psi series, but published maximum pressure figures differ: 3,000 psi and 320 bar appear in separate listings. Do not assume the series designation is the allowable pressure for your complete assembly. Confirm the exact flange rating and all mating components for the operating conditions before use.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.