Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Holmbury 1/2" BSPP Female Flat Faced Coupling HFT10-F-08G
sealPart number: HFT10-F-08G
Holmbury HFT10-F-08G is a female screw-to-connect flat-face hydraulic coupling with a 1/2-inch BSPP female port and size 10 (3/8-inch) body. It is made from zinc-nickel-plated carbon steel with nitrile seals. The HFT10 is rated for 550 bar maximum working pressure when coupled and 23 L/min rated flow.
Looking for Holmbury HFT10-F-08G? This catalogue reference is listed under seal. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Holmbury |
|---|---|
| Part number | HFT10-F-08G |
| Category | Hydraulics |
| Published designation | Holmbury 1/2" BSPP Female Flat Faced Coupling HFT10-F-08G |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Coupling type | Screw-to-connect flat-face female coupling |
| Port thread | 1/2 in BSPP female |
| Body size | 10 (3/8 in) |
| Maximum working pressure, coupled | 550 bar |
| Rated flow | 23 L/min |
| Body material | Carbon steel |
| Surface finish | Zinc nickel plating |
| Seal material | Nitrile rubber (NBR) |
| Operating temperature | -40 to +106 °C with NBR seals |
| Diameter D1 | 38.0 mm |
| Length L1 | 71.0 mm |
| Across flats | 30.0 mm |
| Flow direction | Bidirectional |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What thread and body size does HFT10-F-08G have?
It has a 1/2-inch BSPP female port and a size 10 (3/8-inch) coupling body. The port thread size and coupling body size are different measurements.
What are the working pressure and rated flow for this coupling?
A published reference lists a maximum working pressure of 550 bar when coupled and a rated flow of 23 L/min for HFT10. Check the ratings of the complete hydraulic system and mating half.
Can this HFT coupling connect with residual pressure?
A published reference says HFT couplings can be connected and disconnected with high residual pressure in the male coupling. This is not a blanket rating for pressure on both sides; confirm the conditions and follow the manufacturer’s instructions.
Will HFT10-F-08G fit my hydraulic attachment?
Fitment cannot be established from the equipment name alone. Confirm the mating coupling series and body size, port thread, pressure and flow requirements; provide the equipment model and serial number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.