Images are for reference only. The supplied part’s appearance may differ.
John Guest - PE-0604-0100M-Y 100 M Metric LLDPE Tubing
Pneumatics & air systemsPart number: PE-0604-0100M-Y
A published reference PE-0604-0100M-Y is yellow linear low-density polyethylene (LLDPE) tubing supplied in a 100 m coil, with a 6 mm outside diameter and 4 mm inside diameter. Designed for microbore air and pneumatic applications, it is also listed for cold and intermittent hot water. Check pressure, temperature and fluid compatibility for the intended system.
Looking for John Guest PE-0604-0100M-Y? This catalogue reference is listed under Pneumatics & air systems. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | John Guest |
|---|---|
| Part number | PE-0604-0100M-Y |
| Category | Pneumatics & air systems |
| Published designation | John Guest - PE-0604-0100M-Y 100 M Metric LLDPE Tubing |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Material | Linear low-density polyethylene (LLDPE) |
| Outside diameter | 6 mm |
| Inside diameter | 4 mm |
| Coil length | 100 m |
| Colour | Yellow |
| Maximum pneumatic pressure | 10 bar at 20 °C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What are the dimensions and coil length of PE-0604-0100M-Y?
This yellow LLDPE tube has a 6 mm outside diameter and a 4 mm inside diameter. It is supplied as a 100 m coil.
What is the pneumatic pressure rating for this tubing?
A published reference specifies a maximum of 10 bar at 20°C for pneumatic use. Confirm the complete system’s limits and the rating at your actual operating temperature before use.
Can this yellow tubing be used with water, oil or fuel?
A published reference lists the tubing for cold and intermittent hot water as well as pneumatic use. It does not recommend LLDPE for mineral oils, gases or fuels; check the intended fluid and operating conditions before ordering.
Is the yellow tubing suitable for direct sunlight?
A published reference identifies the black version as UV-stabilised for direct sunlight, but does not make that claim for this yellow tube. Confirm protection and suitability for the intended exposure.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.