Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
John Guest - PE-08-BI-0500F-B 150 M Imperial LLDPE Tubing
Pneumatics & air systemsPart number: PE-08-BI-0500F-B
A published reference PE-08-BI-0500F-B is blue linear low-density polyethylene (LLDPE) tubing with a 1/4-inch outside diameter and 0.17-inch inside diameter, supplied in a 500-foot coil (approximately 152 metres). It is intended for cold and intermittent hot water and pneumatic applications within the applicable operating limits.
Looking for John Guest PE-08-BI-0500F-B? This catalogue reference is listed under Pneumatics & air systems. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | John Guest |
|---|---|
| Part number | PE-08-BI-0500F-B |
| Category | Pneumatics & air systems |
| Published designation | John Guest - PE-08-BI-0500F-B 150 M Imperial LLDPE Tubing |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Material | Linear low-density polyethylene (LLDPE) |
| Outside diameter | 1/4 in |
| Inside diameter | 0.17 in |
| Coil length | 500 ft (approximately 152 m) |
| Color | Blue |
| Minimum bend radius | 1.00 in |
| Pneumatic pressure limit | 10 bar at 20 °C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size and length is PE-08-BI-0500F-B?
This blue LLDPE tubing has a 1/4-inch outside diameter and a 0.17-inch inside diameter. The specified coil length is 500 feet, approximately 152 metres; it is not an exact 150-metre coil.
Can this tubing be used for compressed air?
A published reference permits LLDPE tubing in pneumatic applications up to 10 bar at 20°C, but does not recommend it for high-pressure pneumatic systems. The complete system is limited by its lowest-rated component; check actual conditions and fittings.
Is the blue tubing suitable for direct sunlight?
Protect this blue tubing from direct sunlight. A published reference identifies black LLDPE as UV-stabilised and says other colours must be protected from light when biofilm growth is a concern.
Can this tube carry water, mineral oil or fuel?
A published reference lists the tubing for cold and intermittent hot water. It does not recommend LLDPE for mineral oils, gases or fuels. Check tube and fitting compatibility with any cleaning agents or aggressive liquids before use.
What fittings should I use with this 1/4-inch tube?
Select fittings specified for 1/4-inch outside-diameter LLDPE tubing and the intended fluid, pressure and temperature. A published reference describes its PE tubing as designed for Speedfit push-to-connect fittings; verify the individual fitting specifications before ordering.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.