Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
John Guest - PE-08-BI-0500F-N 150 M Imperial LLDPE Tubing
Pneumatics & air systemsPart number: PE-08-BI-0500F-N
A published reference PE-08-BI-0500F-N is natural-colour linear low-density polyethylene (LLDPE) tubing with a 1/4 inch outside diameter and 0.170 inch inside diameter. It is supplied as a 500 ft coil, approximately 152 m. It is intended for suitable cold and intermittent hot water and pneumatic applications, subject to the applicable operating limits.
Looking for John Guest PE-08-BI-0500F-N? This catalogue reference is listed under Pneumatics & air systems. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | John Guest |
|---|---|
| Part number | PE-08-BI-0500F-N |
| Category | Pneumatics & air systems |
| Published designation | John Guest - PE-08-BI-0500F-N 150 M Imperial LLDPE Tubing |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Material | Linear low-density polyethylene (LLDPE) |
| Outside diameter | 1/4 in |
| Inside diameter | 0.170 in |
| Coil length | 500 ft (approximately 152 m) |
| Colour | Natural |
| Minimum bend radius | 1.00 in |
| Pneumatic pressure limit | 10 bar at 20°C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size and length is PE-08-BI-0500F-N?
It is natural-colour LLDPE tubing with a 1/4 inch outside diameter and 0.170 inch inside diameter. The manufacturer lists a 500 ft coil, approximately 152 m.
What fitting size should I check for this tubing?
Select fittings intended for 1/4 inch outside-diameter LLDPE tubing, and verify their pressure, temperature and fluid ratings. The 0.170 inch measurement is the inside diameter, not the fitting size.
Can this tubing be used for water or compressed air?
A published reference lists it for cold and intermittent hot water and pneumatic applications. For pneumatics, the stated maximum is 10 bar at 20°C; the complete assembly is limited by its lowest-rated component. Confirm operating conditions before use.
Can the natural-colour tubing be exposed to sunlight?
Protect this natural-colour tube from direct UV exposure. The manufacturer identifies black tubing as UV stabilised; natural tubing is not the black variant.
Is PE-08-BI-0500F-N suitable for oil, fuel or aggressive chemicals?
A published reference does not recommend this LLDPE tubing for mineral oils, gases, fuels or high-pressure pneumatic systems. For chemicals or cleaning agents, confirm compatibility of both the tubing and fittings before use.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.