Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
John Guest - PE-08-BI-0500F-W 150 M Imperial LLDPE Tubing
Pneumatics & air systemsPart number: PE-08-BI-0500F-W
A published reference PE-08-BI-0500F-W is white linear low-density polyethylene (LLDPE) tubing with a 1/4-inch outside diameter and 0.17-inch inside diameter, supplied in a 500-foot coil (approximately 152 m). The manufacturer lists it for air and pneumatic, cold water and intermittent hot water applications.
Looking for John Guest PE-08-BI-0500F-W? This catalogue reference is listed under Pneumatics & air systems. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | John Guest |
|---|---|
| Part number | PE-08-BI-0500F-W |
| Category | Pneumatics & air systems |
| Published designation | John Guest - PE-08-BI-0500F-W 150 M Imperial LLDPE Tubing |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Material | Linear low-density polyethylene (LLDPE) |
| Colour | White |
| Outside diameter | 1/4 in |
| Inside diameter | 0.17 in |
| Coil length | 500 ft (approximately 152 m) |
| Maximum pneumatic pressure | 10 bar at 20°C |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size and length is PE-08-BI-0500F-W tubing?
A published reference lists this white tubing with a 1/4-inch outside diameter, a 0.17-inch inside diameter and a 500-foot coil length, approximately 152 metres. Check the outside diameter and intended fitting requirements before ordering.
Can this tubing be used for compressed air?
A published reference identifies this LLDPE tubing for air and pneumatic applications and specifies a maximum pneumatic pressure of 10 bar at 20°C. It is not recommended for high-pressure pneumatic systems. Confirm the complete system rating and operating conditions before use.
Can the white tubing be used with water, oils or outdoors?
The manufacturer lists the tubing for cold and intermittent hot water, but does not recommend LLDPE for mineral oils, gases or fuels. Its guidance identifies black tubing as UV-stabilised for direct sunlight; do not assume the white version is suitable for that exposure. Confirm chemical compatibility for the intended fluid.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.