Images are for reference only. The supplied part’s appearance may differ.
JWL Jet Washer 6-10 Bar 1/4"BSP Air Con 102010-000
Hardware & fastenersPart number: 102010-000
The JWL 102010-000 Jet Washer is a cleaning gun that combines compressed air and water. It has separately adjustable air and water flow, a swivelling water connection and a standard wide washing nozzle. The water inlet accepts a 1/2-inch nipple or a 3/4-inch GHT hose thread; the air inlet is 1/4-inch female BSP.
Looking for JWL 102010-000? This catalogue reference is listed under Hardware & fasteners. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | JWL |
|---|---|
| Part number | 102010-000 |
| Category | Hardware & fasteners |
| Published designation | JWL Jet Washer 6-10 Bar 1/4"BSP Air Con 102010-000 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Air connection | 1/4 inch female BSP |
| Water connection | 1/2 inch nipple (13 mm) or 3/4 inch GHT thread |
| Air consumption | 200 L/min at 8 bar |
| Standard nozzle | Wide washing nozzle |
| Handle and trigger material | Acetal plastic |
| Valve material | Acetal plastic |
| Seal material | Nitrile |
| Nozzle material | POM |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What compressor does the JWL 102010-000 Jet Washer require?
JWL lists air consumption of 200 L/min at 8 bar. Check that your compressor can deliver this flow at the required pressure. Published pressure figures differ: the manufacturer page says a maximum of 16 bar, while another listing gives 6–10 bar. Confirm the correct operating range for the supplied unit before use.
What air and water connections does the 102010-000 use?
The air inlet has a 1/4-inch female BSP thread. Water connects through the supplied 1/2-inch, 13 mm nipple or the built-in 3/4-inch GHT hose thread. Check your hose fittings before ordering.
Can the Jet Washer flush a cooling system?
The standard tool comes with a wide washing nozzle. JWL also lists a separate Jet Flusher nozzle for cooling systems that can replace the washing nozzle. Confirm the nozzle needed for your task; the flusher nozzle is not the standard washing nozzle.
Can the air and water flow be adjusted separately?
Yes. The Jet Washer has separate adjustable air and water controls, and the water can be shut off at the gun. A built-in swivel lets the connected water hose rotate.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.