Images are for reference only. The supplied part’s appearance may differ.
M+S EPMS200C Hydraulic Orbital Motor Danfoss OMS Replacement 200CC, 75L/Min, 210 Bar
HydraulicsPart number: EPMS200C
The M+S EPMS200C is a 200 cm³/rev hydraulic orbital motor with a 32 mm cylindrical shaft, SAE A-4 four-hole mounting and two G 1/2 BSPP side ports. Confirm the motor identification and operating requirements before ordering a replacement.
Looking for M+S EPMS200C? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | M+S |
|---|---|
| Part number | EPMS200C |
| Category | Hydraulics |
| Published designation | M+S EPMS200C Hydraulic Orbital Motor Danfoss OMS Replacement 200CC, 75L/Min, 210 Bar |
| pressure in the drain line | 100 bar Please note that the product may not be exact to the image shown. |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Displacement | 200 cm³/rev |
| Maximum oil flow | 75 L/min |
| Maximum speed | 375 rpm |
| Shaft | 32 mm diameter, cylindrical |
| Side ports | 2 × G 1/2 BSPP |
| Mounting flange | SAE A-4, four holes, 106.4 mm hole spacing |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What displacement and flow are listed for the EPMS200C?
The EPMS200C is listed with a displacement of 200 cm³ per revolution and a maximum oil flow of 75 L/min. Its published maximum speed is 375 rpm; confirm the operating limits for the specific motor before selecting it.
What shaft, mounting flange and ports does the EPMS200C have?
The published configuration has a 32 mm cylindrical shaft, an SAE A-4 four-hole flange with 106.4 mm hole spacing, and two G 1/2 BSPP side ports. Compare the shaft, mounting and connections with the existing motor before ordering.
Can the EPMS200C replace a Danfoss OMS motor?
The EPMS200C is marketed as an OMS replacement, but that does not establish interchangeability with every OMS version or machine. Provide the existing motor’s complete identification and the equipment model and serial number so the shaft, flange, ports and operating limits can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.