Images are for reference only. The supplied part’s appearance may differ.
Macnaught MX09F-1SA Positive Displacement Digital Flow Meter (No Box)
sealPart number: MX09F-1SA
The Macnaught MX09F-1SA is a 1/4-inch positive displacement oval gear flow meter designed for measuring fuels and oils. It has a 6061 aluminium body, PPS rotors, FKM seals and a standard reed and NPN Hall-effect pulse output. The specified flow range depends on fluid viscosity, and the process connection is 1/4-inch G thread. Confirm fluid and system compatibility before ordering.
Looking for Macnaught MX09F-1SA? This catalogue reference is listed under seal. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Macnaught |
|---|---|
| Part number | MX09F-1SA |
| Category | Hydraulics |
| Published designation | Macnaught MX09F-1SA Positive Displacement Digital Flow Meter (No Box) |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Measuring principle | Positive displacement, oval gear |
| Process connection | 1/4-inch G thread |
| Flow range below 5 cP | 25–500 L/h |
| Flow range above 5 cP | 15–500 L/h |
| Maximum pressure | 1,000 psi (68.9476 bar) |
| Meter operating temperature | -40 to 80 °C |
| Accuracy | ±0.5% of reading |
| Repeatability | ±0.03% |
| Nominal K-factor | 400 pulses/L |
| Meter body | 6061 aluminium |
| Rotor material | PPS |
| Seal material | FKM (Viton) |
| Output | Standard pulse: reed and NPN Hall effect |
| Pulse output enclosure rating | IP67 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What flow range does the MX09F-1SA measure?
The specified range depends on fluid viscosity: 25–500 L/h below 5 cP and 15–500 L/h above 5 cP. Confirm the operating fluid and flow range before selection; the manufacturer does not specify the minimum for non-lubricating fluids.
Does the MX09F-1SA have a display or a pulse output?
This exact configuration has standard pulse outputs: a reed switch and an NPN Hall-effect output. The manufacturer lists no upper or lower LCD and no 4–20 mA output for this configuration. Check the receiving equipment’s input requirements before ordering.
What connection and pressure rating does the MX09F-1SA have?
The manufacturer specifies a 1/4-inch G-thread process connection and a maximum pressure of 1,000 psi (approximately 68.95 bar). Check the existing thread and system pressure before selecting the meter.
Can the MX09F-1SA measure my fuel or oil?
Macnaught describes the meter as intended for fuels and oils; its body is 6061 aluminium, with PPS rotors and FKM seals. Verify compatibility with the specific fluid and operating conditions. For replacement on equipment, provide the equipment model and serial number so suitability can be checked.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.