Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
Manuli Rockmaster 4SP 4 Wire Multispiral Hydraulic Hose — 1/2" DN12
hosePart number: H10008012
Manuli ROCKMASTER/4SP H10008012 is a DN12, dash -8 hydraulic hose with a nominal 1/2-inch bore and four high-tensile steel spirals. Its oil-resistant synthetic rubber tube and abrasion-, weather- and heat-resistant cover are intended for demanding high-pressure hydraulic lines. Manuli lists a maximum working pressure of 420 bar and a minimum bend radius of 175 mm. Confirm the complete assembly and equipment requirements before ordering.
Looking for Manuli H10008012? This catalogue reference is listed under hose. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Manuli |
|---|---|
| Part number | H10008012 |
| Category | Hydraulics |
| Published designation | Manuli Rockmaster 4SP 4 Wire Multispiral Hydraulic Hose |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Hose size | DN12; dash -8; nominal 1/2 in |
| Outside diameter | 24.2 mm (0.95 in) |
| Maximum working pressure | 420 bar (6,090 psi) |
| Burst pressure | 1,750 bar (25,380 psi) |
| Minimum bend radius | 175 mm (6.89 in) |
| Continuous service temperature | -40 to 121 °C (-40 to 250 °F) |
| Reinforcement | Four high-tensile steel spirals |
| Inner tube | Oil-resistant synthetic rubber |
| Cover | STRONG type SD synthetic rubber; abrasion, ozone, weather and heat resistant |
| Applicable specifications | Exceeds EN 856 4SP and ISO 3862 4SP |
| Standard fitting combination | MF + M00910-08 |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What size is Manuli H10008012 and what clearance does it need?
H10008012 is a DN12, dash -8 hose with a nominal 1/2-inch bore. Manuli lists an outside diameter of 24.2 mm and a minimum bend radius of 175 mm. Check the hose routing and end fittings against the intended installation.
What are the working and burst pressures of H10008012?
Manuli lists a maximum working pressure of 420 bar (6,090 psi) and a burst pressure of 1,750 bar (25,380 psi). Burst pressure is not a working pressure; verify the rating of the complete assembly and the system requirements.
Which fluids and temperatures are specified for ROCKMASTER 4SP H10008012?
Manuli lists a continuous service range of -40 to 121 °C. Its stated fluids include mineral oil, vegetable oil, synthetic ester oils, glycols, polyglycols, mineral oil in aqueous emulsion and water. Vegetable and synthetic ester oils are limited to 100 °C. Confirm suitability for the specific fluid and conditions.
Which fittings are listed for the H10008012 hose?
Manuli lists the standard fitting combination as MF + M00910-08. Confirm the required end connection and assembly using the current Manuli digital crimp tools; do not assume a fitting from another hose system is interchangeable.
Will H10008012 fit my machine hydraulic line?
The hose size alone does not establish machine fitment. Supply the equipment model and serial number, the existing hose markings, required length and end connections so the replacement assembly can be verified against the application.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.