Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
A1S-X41 — Mitsubishi Q Series Dc Input Module, 3 Ma, 12 V Dc, 10 Ms
connectorPart number: A1S-X41
The a published reference A1S-X41, also identified as A1SX41, is a MELSEC-A DC input module with 32 input points. It is rated for 12 or 24 V DC and uses a positive common and a 40-pin connector. Confirm the PLC and base-unit configuration before ordering.
Looking for Mitsubishi Electric A1S-X41? This catalogue reference is listed under connector. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Mitsubishi Electric |
|---|---|
| Part number | A1S-X41 |
| Category | Sensors & automation |
| Published component description | Mitsubishi Q Series Dc Input Module, 3 Ma, 12 V Dc, 10 Ms |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Input points | 32 points |
| Rated input voltage | 12/24 V DC |
| Permissible input voltage | 10.2–26.4 V DC |
| Rated input current | Approximately 3 mA at 12 V DC; approximately 7 mA at 24 V DC |
| Maximum simultaneous inputs | 60% at 26.4 V DC |
| Input response time | OFF to ON and ON to OFF: 10 ms or less at 24 V DC |
| Input common | 32 points per common; positive common |
| External connection | 40-pin connector |
| Isolation | Photocoupler |
| Input resistance | Approximately 3.3 kΩ |
| Dimensions (H × W × D) | 130 × 34.5 × 93.6 mm |
| Mass | 0.21 kg |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
How many inputs does the A1S-X41 have, and what voltage does it accept?
The A1S-X41, also identified as A1SX41, has 32 DC inputs rated for 12 or 24 V DC. The permissible input voltage range is 10.2 to 26.4 V DC.
What connector and common arrangement does the A1S-X41 use?
The module uses a 40-pin connector and a positive-common arrangement, with one common for all 32 inputs. Check the applicable wiring diagram and connector before ordering.
Can all 32 A1S-X41 inputs be on simultaneously?
Mitsubishi specifies a maximum simultaneous input rate of 60% at 26.4 V DC. Check the operating conditions and system design rather than assuming all 32 inputs can be on at that voltage.
Is the A1S-X41 a Q Series module and will it fit my PLC?
Mitsubishi lists A1SX41 under MELSEC-A, rather than identifying it as a Q Series module. Fitment for a particular installation is not established here; provide the PLC and base-unit model numbers and equipment serial number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.