Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Norres 315-325MM Clamp with Offset Bridge 212-0315-0000
HydraulicsPart number: 212-0315-0000
A published reference CLAMP 212, part 212-0315-0000, is a reusable bridge clamp for externally corrugated spiral hoses. It is listed for hose inside diameters of 320–325 mm, with a 315–335 mm clamping range and a 12 mm band. The W2 construction combines stainless-steel band, bridge and body components with a galvanised-steel screw. Confirm the hose profile and assembled diameter before ordering.
Looking for Norres 212-0315-0000? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Norres |
|---|---|
| Part number | 212-0315-0000 |
| Category | Hydraulics |
| Published designation | Norres 315-325MM Clamp with Offset Bridge 212-0315-0000 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Suitable hose inside diameter | 320–325 mm |
| Clamping range | 315–335 mm |
| Band width | 12 mm |
| Material grade | W2 |
| Band material | Stainless steel 1.4301 (AISI 304) |
| Bridge material | Stainless steel 1.4301 (AISI 304) |
| Body material | Stainless steel 1.4016 (AISI 430) |
| Screw material | Galvanised steel |
| Design | Bridge clamp for externally corrugated spiral hoses |
| Reusability | Reusable |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What hose size and clamping range does a published reference 212-0315-0000 cover?
A published reference specifies a suitable hose inside diameter of 320–325 mm and a clamp adjustment range of 315–335 mm. These are different measurements; confirm the hose type and assembled outside diameter before ordering.
What type of hose is this bridge clamp designed for?
CLAMP 212 is intended for attaching externally corrugated spiral hoses. The bridge accommodates the hose spiral; check the hose profile and dimensions for the particular installation before choosing this size.
Is the 212-0315-0000 clamp entirely galvanised steel?
No. A published reference describes a W2 construction with an AISI 304 stainless-steel band and bridge, an AISI 430 stainless-steel body, and a galvanised-steel screw. The clamp is reusable.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.