Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Norres Seal Clamp AIRDUC 345 355 356 60MM ID 216-0060-0000
HydraulicsPart number: 216-0060-0000
A published reference CLAMP 216 sealing clamp, part 216-0060-0000, for a 60 mm hose internal diameter. Designed for heavy, externally corrugated spiral hoses, it is listed for AIRDUC 345, 355 and 356 hoses. Its spiral geometry provides a watertight, tensile connection at very low overpressure. The clamp is reusable.
Looking for Norres 216-0060-0000? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Norres |
|---|---|
| Part number | 216-0060-0000 |
| Category | Hydraulics |
| Published designation | Norres Seal Clamp AIRDUC 345 355 356 60MM ID 216-0060-0000 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Suitable hose internal diameter | 60 mm |
| Clamp quality | W2 |
| Clamp band material | Stainless steel 1.4016 (AISI 430) |
| Clamp wire material | Stainless steel 1.4310 (AISI 301) |
| Clamp body material | Stainless steel 1.4016 (AISI 430) |
| Screw material | Chromated steel |
| Reusability | Reusable |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What hose size and type does 216-0060-0000 suit?
A published reference lists this clamp for 60 mm hose inside diameter in the AIRDUC 345, 355 and 356 group. The 60 mm refers to the hose internal diameter, not the clamp outside diameter. Confirm the hose designation and dimensions before ordering.
Is the clamp suitable for a watertight connection?
A published reference describes CLAMP 216 as a sealing clamp for heavy, externally corrugated spiral hoses. Its spiral geometry is intended to provide a watertight, tensile connection at very low overpressure; a numerical pressure rating is not specified on the product page.
What materials are used in the a published reference 216 clamp?
The W2 construction uses stainless steel 1.4016 (AISI 430) for the band and body, stainless steel 1.4310 (AISI 301) for the wire, and chromated steel for the screw. It is not an all-stainless-steel assembly.
Can the 216-0060-0000 clamp be reused?
Yes. A published reference describes the CLAMP 216 as reusable and easy to fit. Check its condition and suitability for the intended connection before reuse.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.