Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Norres Seal Clamp AIRDUC 345 355 356 70MM ID 216-0070-0000
HydraulicsPart number: 216-0070-0000
A published reference 216-0070-0000 is a CLAMP 216 sealing clamp for a 70 mm hose inside diameter. Designed for heavy, externally corrugated spiral hoses, it is listed for AIRDUC 345, 355 and 356 hoses. Its spiral geometry provides a watertight, tensile connection at very low overpressure, and the clamp is reusable.
Looking for Norres 216-0070-0000? This catalogue reference is listed under Hydraulics. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Norres |
|---|---|
| Part number | 216-0070-0000 |
| Category | Hydraulics |
| Published designation | Norres Seal Clamp AIRDUC 345 355 356 70MM ID 216-0070-0000 |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Suitable hose inside diameter | 70 mm |
| Clamp quality | W2 |
| Clamp band material | Stainless steel 1.4016 (AISI 430) |
| Clamp wire material | Stainless steel 1.4310 (AISI 301) |
| Body material | Stainless steel 1.4016 (AISI 430) |
| Screw material | Chromated steel |
| Reusability | Reusable |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Which hose size and types does clamp 216-0070-0000 suit?
A published reference lists this clamp for a 70 mm hose inside diameter and identifies it for AIRDUC 345, 355 and 356 hoses. Check the hose designation and inside diameter before ordering; equipment-specific fitment is not established, so provide the equipment model and serial number if confirmation is needed.
Is this clamp watertight and suitable for pressurised connections?
A published reference describes CLAMP 216 as providing a watertight, tensile connection at very low overpressure. It does not state a numerical pressure rating for this clamp on the product page; confirm suitability for the actual operating pressure before use.
What is the clamp made of, and can it be reused?
The CLAMP 216 design uses stainless steel for the band, wire and body, with a chromated steel screw. A published reference describes the clamp as reusable. The screw is not listed as stainless steel.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.