Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
NX1P2-9024DT1 — Machine Automation Controller CPU Unit
control modulePart number: NX1P2-9024DT1
The Omron NX1P2-9024DT1 is an NX1P machine a published reference controller CPU with 14 digital inputs and 10 PNP outputs. It provides built-in EtherCAT and EtherNet/IP communications, 1.5 MB of program memory and support for up to four point-to-point axes. The DIN-rail-mount controller has a 2 ms primary task cycle time and supports up to eight local expansion units.
Looking for Omron NX1P2-9024DT1? This catalogue reference is listed under control module. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Omron |
|---|---|
| Part number | NX1P2-9024DT1 |
| Category | Sensors & automation |
| Item Type Name | Machine Automation Controller CPU Unit |
| Product Family / Series | NX1P2 Series |
| Model Number | NX1P2-9024DT1 |
| Alternate Part Numbers | NX1P29024DT1, NX1P2-9024-DT1 |
| control_type | No motion control axis (Single-axis position control only) |
| motion_axes | Up to 4 point-to-point axes; 0 synchronous axes |
| servo_axes | 0 servo axes |
| synchronized_motion_axes | 0 axes |
| built_in_io | 24 digital points: 14 inputs and 10 outputs |
| input_type | PNP/NPN digital inputs |
| output_type | PNP transistor outputs |
| output_voltage_range | 15 to 28.8 V DC |
| output_current | Maximum switching current 300 mA per output point; internal I/O supply consumption 50 mA per common, excluding load current |
| program_memory | 1.5 MB |
| variable_memory_non_volatile | 32 kB |
| variable_memory_volatile | 2 MB |
| supply_voltage | 20.4 to 28.8 V DC |
| cycle_time | 2 ms primary task cycle time |
| ethercat_nodes | 16 nodes maximum |
| ethernet_ip_port | Built-in EtherNet/IP and EtherCAT ports; 2 Ethernet ports total |
| programming_language | Ladder, structured text and function block |
| battery_backup | Battery-free memory retention |
| load_short_circuit_protection | Provided for each PNP output point |
| Mounting Type | DIN rail |
| Programming Software | Sysmac Studio |
| Compatible Units | Up to 8 NX I/O Units directly connectable, up to 16 remote NX I/O Units via EtherCAT coupler |
| Option Boards | 1 serial option-board slot |
| Dimensions | 126.1 x 71 x 100 mm (excluding projecting parts) |
| Reference status | Published catalogue reference; confirm specification and fitment before ordering |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
How many inputs and outputs does the NX1P2-9024DT1 have?
It has 24 built-in digital I/O points: 14 inputs accepting PNP or NPN signals and 10 PNP transistor outputs.
What is the output current rating, and is it the same as the I/O supply consumption?
The PNP outputs are rated for a maximum switching current of 300 mA per point at 15–28.8 V DC. The 50 mA per common figure is internal I/O power supply consumption, not the output load rating.
Can this controller handle synchronized motion?
It supports up to four point-to-point axes but has zero synchronous or coordinated motion axes. Confirm the required motion functions and drive configuration before selecting it.
What communications and expansion options are built in?
It has built-in EtherCAT and EtherNet/IP ports and supports up to eight local expansion units. It has one serial option-board slot; check the required board and device configuration separately.
What software and programming languages are used with this controller?
Omron lists Sysmac Studio for the NX1P2-9024DT1 and specifies ladder, structured text and function block programming. Check the software version required for the intended project.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.