Catalogue reference. Availability, exact specification and OEM or aftermarket supply are confirmed in your quotation.
UC4000-L2-U-V15 — Ultrasonic Proximity Sensor
proximity sensorPart number: UC4000-L2-U-V15
The Pepperl+Fuchs UC4000-L2-U-V15 is a programmable single-head ultrasonic sensor with a 200–4,000 mm sensing range and a 0–10 V analog output. It operates from 12–30 V DC and has a rotatable sensor head, selectable sound lobe width and an M12 5-pin connector.
Looking for Pepperl+Fuchs UC4000-L2-U-V15? This catalogue reference is listed under proximity sensor. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Pepperl+Fuchs |
|---|---|
| Part number | UC4000-L2-U-V15 |
| Category | Sensors & automation |
| Item Type Name | Ultrasonic Proximity Sensor |
| Product Family / Series | UC4000-L2 |
| Product Series | L2 |
| sensing_range | 200–4000 mm |
| adjustment_range | 240–4000 mm |
| dead_band | 0–200 mm |
| transducer_frequency | Approximately 85 kHz |
| supply_voltage | 12–30 V DC |
| voltage_ripple_tolerance | 10% SS |
| analog_output | 1 analog output, 0–10 V |
| response_delay | Minimum 110 ms; factory setting 615 ms |
| time_delay_before_availability | ≤ 1600 ms |
| no_load_current | ≤ 50 mA |
| beam_width | Selectable; wide factory setting |
| output_function | rising ramp (factory setting) |
| evaluation_limit_A1 | 240 mm (factory setting) |
| evaluation_limit_A2 | 4000 mm (factory setting) |
| output_logic | non-inverting |
| output_load | pull-down |
| connection_type | M12 x 1 connector plug, 5-pin |
| standard_target_plate | 100 mm x 100 mm |
| Protection Rating | IP67 |
| Operating Temperature | -25 to +70 °C |
| Housing Material | PA-GF35 |
| Transducer Material | epoxy resin / hollow glass sphere mixture / polyurethane foam |
| Programmability | programmable via programming key, programming input, or serial interface |
| Programming Window | first 5 minutes after power-on |
| Led Indicators | green LED (operating display), yellow LED (object in evaluation range) |
| Mounting System | quick mounting bracket |
| Weight | 120 g |
| Dimensions | 40 mm (W) x 40 mm (H) x 67 mm (L) |
| Reference status | Published catalogue reference; confirm specification and fitment before ordering |
| Availability | On request |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
What sensing and adjustment ranges does the UC4000-L2-U-V15 offer?
The sensing range is 200–4,000 mm, with an adjustment range of 240–4,000 mm. The specified dead band is 0–200 mm; objects in that zone are outside the sensing range.
What output and power supply does this ultrasonic sensor require?
It has one 0–10 V analog output and operates on 12–30 V DC. The specified output load impedance is at least 500 ohms, and the connection is an M12 x 1, 5-pin plug.
What are the factory settings and response delay?
The manufacturer lists a rising analog ramp with evaluation limits of 240 mm and 4,000 mm and a wide beam. Its current technical data lists a 110 ms minimum response delay and a 615 ms factory setting; verify the applicable data for the supplied revision.
Is the UC4000-L2-U-V15 suitable as a replacement for my existing sensor?
Match the complete part number, 0–10 V output, supply voltage, connector, sensing range and programmed settings. Equipment-specific fitment is not established; provide the equipment model and serial number for verification.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.