Representative component image—not a photograph of this exact brand or part number. Confirm the specification; the supplied part may look different.
Redashe Heavy Duty Spring Rewind Reel 20M 3/8" ID Carbon Steel CHR826-12-366L
springPart number: CHR826-12-366L
The a published reference CHR826-12-366L is a heavy-duty spring rewind hose reel made from powder-coated carbon steel. It accommodates up to 20 m of 3/8-inch internal diameter hose and is supplied as a bare reel. The double-arm design supports floor, wall or ceiling mounting, with slow retraction and a hose latch. Confirm the pressure rating and intended application before ordering.
Looking for Redashe CHR826-12-366L? This catalogue reference is listed under spring. Send the part number and your equipment details so we can confirm the specification, availability and a quotation including shipping.
Availability on request
Technical specifications
| Manufacturer | Redashe |
|---|---|
| Part number | CHR826-12-366L |
| Category | Hydraulics |
| Published designation | Redashe Heavy Duty Spring Rewind Reel 20M 3/8" ID Carbon Steel CHR826-12-366L |
| Reference status | Published part reference; specification and fitment require confirmation |
| Availability | On request |
| Hose capacity | Up to 20 m of 3/8 in internal diameter hose |
| Hose internal diameter | 3/8 in |
| Inlet and outlet | 3/8 in BSPTF |
| Reel dimensions | 27 cm W × 55 cm H × 50 cm D |
| Net weight | 18 kg |
| Construction | Powder-coated carbon steel |
| Rewind | Spring rewind with slow retraction |
| Mounting | Floor, wall or ceiling |
| Supply configuration | Bare reel; hose not included |
Catalogue information may contain errors or be out of date. Full specifications and verified details are available on request. Confirm the part number and equipment fitment with us before ordering.
Product questions
Does the CHR826-12-366L come with a hose, and what size can it hold?
A published reference describes it as a bare reel, without a hose. Its stated capacity is up to 20 m of 3/8-inch internal diameter hose. Specify the intended application when selecting a hose.
What is the maximum pressure for the CHR826-12-366L?
The published pressure figures conflict: a published reference product page lists 300 psi (20 bar), while its catalogue lists 4,786 psi (330 bar) for this exact part. Confirm the applicable rating before selecting or operating the reel; do not assume the higher figure applies.
What connections does the CHR826-12-366L use?
A published reference catalogue lists 3/8-inch BSPTF inlet and outlet connections. Confirm the thread and mating fittings for your particular installation before ordering.
Where can this reel be mounted and how does it retract?
A published reference lists floor, wall and ceiling mounting. The spring-rewind mechanism has a slow-retraction function and a latch to hold the hose at the required length.
How much space is needed for the CHR826-12-366L reel?
A published reference lists reel dimensions of 27 cm wide, 55 cm high and 50 cm deep, with an approximately 18 kg net weight. Allow for the installation and hose routing when planning the space.
Researched on:
Research information may be outdated. Confirm fitment and specifications with our team before ordering.